When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
a million z`s with roll/pull from a bat and it worked? Highly doubt its quality then, unless your talking about doing the right way and doing it with the heat gun and roller....
just saying that i've never seen a dimpled qp from a pull on a z. i wouldn't exactly recommend using a bat/jack handle, but i have done/seen a few clean rolls/pulls done with one and the help of a hammer, scissor jack, special wood block, heat gun, and a lot of patience
a roller would indeed make the job easier and make for a more consistent roll/pull so by all means, use one instead hahahaha
i really should buy one...
Originally Posted by JZ33
the way the qp is on Z's for some reason just isnt conducive to folding or dimpling really...
anyone running 265-40-18's in the rear and lowered on springs? i wanted to know if u guys rub...and also 245-40-18 in the front
youll be fine.. mine is 245 all around on megan springs, I even did the spring mount cut after the pic and I still have room and no scrapes... I wouldnt even worry about 265'd unless they had stupidly tall sidewalls.... BUT, when coil overs come into play... thats a different story...
youll be fine.. mine is 245 all around on megan springs, I even did the spring mount cut after the pic and I still have room and no scrapes... I wouldnt even worry about 265'd unless they had stupidly tall sidewalls.... BUT, when coil overs come into play... thats a different story...
anyone running 265-40-18's in the rear and lowered on springs? i wanted to know if u guys rub...and also 245-40-18 in the front
I'm on springs+springmount mod atm and my rears are 295/30/19. Fenders are rolled and there's no rubbing. The front on the other hand is a different story
