I need help with installing hid bulb

So today i finally got my hid bulbs and i got to work.. I jacked up the car which took me an hour to figure out how to do it.(my car is lowered) Then i took off the wheels and the clips and screws for the plastic part. I end up not knowing how to take the hid bulb off. Can someone help me?

(2006 350z)

 

well first of all you dont need to jack up the car or take off the wheels.
1. remove bumper
2. remove headlight bolts ( i believe there are 3 on each side)
3. remove headlight ( there is a connector in the back that is a pain to disconnect )
and from here you can remove bulb and ballast.

 

Is there another way besides removing the bumper?

 

Anybody with free time mind helping me?

 

I found that easier to just remove the wheels, fender liners and the headlamps are right in there.

 

there is a DIY for headlights/bulbs...

 

It's not for hid bulbs..

 

I tried that but i dont know how to remove the hid bulb..

 

its on the service manual, under lighting, page 32. I can email you a copy of the service manual..pm me ur email.

 

dominictsangg@gmail.com

I think the problem is that i dont know how to unclip the light bulb

 

it should be easy...emailed you the lighting part and maintenance of the service manual..its a very big file.

good luck!!

 

hmmm i didnt get ur email

 

problem solved, thanks guys

 

yea you can take your wheel off and do it that way, but the bumper off to me is faster and easier to me. Thats how i did mine.

 

......wtf just happened in here? Who wants some China HID's!?


....as they say, everything is made in china.

 

+1

Besides, I thought you had to be at the bare minimum a Premiere Member to offer services & a Vendor to sell & advertise.

Alicehid

 

dont 06+ come with HIDs stock?

 

Remove wheels, remove plastic, big gray circular thing turn counter clockwise remove a solenoid looking thing, theirs a metal clip holding the bulb in place remove that switch bulb, put everything back together and thank me later

 

yes, he probably just wanted a higher K, which is what I just recently did