FS/FT: 93 RHD 240sx VQ35HR swap
name: nick zenzer
email: katillidie@hotmail.com
phone: 215-740-8566 text only please
location: philly pa
93 coupe converted to RHD vq35hr swap
vin:JN1MS34PXPW301017
asking 9,000 obo
I am looking to sell or possibly trade my car! its a 93 s13 coupe chassis with absolutely no rust.. 140k on chassis. it has a 2008 350z vq35hr engine and 6spd trans! they had 18k when pulled from original car..u might say its not worth 9k. but there are only 2 s13's in the united states that i know of that have a vq35hr..one of them is this one! before u say otherwise, i beg to differ. I've researched. I've have had others say i was incorrect. until I find another this car is 1 of 2 s13's with an hr swap...but i also don't want this to be a fighting thread about such! so please do not reply here if u think otherwise send me a pm! End rant.. The rhd clip was purchased from elite jdm! the rhd swap was only done to accommodate the vq swap since the hr has the starter on the left side it was sitting on the steering column...the vq install and rhd swap was done at a local shop called one motion..the car was tuned with uprev at a shop in NY called performance Motorsports Welcome To The Experience | Performance Motorsport 2011' dyno video below and sheets available.. if u are interested just shoot me a text or email im sure im forgetting some things.. open to trades worst i can say is no thanx looking for slightly modded g35 or g37 coupe, r32 gtst, 97-98 s14, 03-04 y34 aka infiniti m45
vehicle has to have back seat i daily mine and i have 2 kids...
anyway whats done to the car...
dyno link
vq35hr powered s13 final dyno run - YouTube
complete build thread
https://my350z.com/forum/other-vehic...upe-build.html
the goods
2008 vq35hr uprev tuned 288hp 237 tq
2.75" intake piping
hybrid stock/frontier clutch
2008 6spd trans
drive-shaft shop one piece drive-shaft
wleded diff
silk road coil overs
17x9.5 rear 17x9 front rota grids
s14 inner and outer tie rods
tein adjustable tension rods
powered by max skid plate
walboro 255 pump
return fuel system
fpr
stock tubular headers
heat wrapped
custom 2.5" y pipe
apexi n1 dual exhaust
mishmoto 66o thermostat
koyo rad
2x12" electric fans
the bads
body needs tlc but what s13 doesnt...
tac and speedo doesn't work but with a Dakota digital converter they can work properly














email: katillidie@hotmail.com
phone: 215-740-8566 text only please
location: philly pa
93 coupe converted to RHD vq35hr swap
vin:JN1MS34PXPW301017
asking 9,000 obo
I am looking to sell or possibly trade my car! its a 93 s13 coupe chassis with absolutely no rust.. 140k on chassis. it has a 2008 350z vq35hr engine and 6spd trans! they had 18k when pulled from original car..u might say its not worth 9k. but there are only 2 s13's in the united states that i know of that have a vq35hr..one of them is this one! before u say otherwise, i beg to differ. I've researched. I've have had others say i was incorrect. until I find another this car is 1 of 2 s13's with an hr swap...but i also don't want this to be a fighting thread about such! so please do not reply here if u think otherwise send me a pm! End rant.. The rhd clip was purchased from elite jdm! the rhd swap was only done to accommodate the vq swap since the hr has the starter on the left side it was sitting on the steering column...the vq install and rhd swap was done at a local shop called one motion..the car was tuned with uprev at a shop in NY called performance Motorsports Welcome To The Experience | Performance Motorsport 2011' dyno video below and sheets available.. if u are interested just shoot me a text or email im sure im forgetting some things.. open to trades worst i can say is no thanx looking for slightly modded g35 or g37 coupe, r32 gtst, 97-98 s14, 03-04 y34 aka infiniti m45
vehicle has to have back seat i daily mine and i have 2 kids...
anyway whats done to the car...
dyno link
vq35hr powered s13 final dyno run - YouTube
complete build thread
https://my350z.com/forum/other-vehic...upe-build.html
the goods
2008 vq35hr uprev tuned 288hp 237 tq
2.75" intake piping
hybrid stock/frontier clutch
2008 6spd trans
drive-shaft shop one piece drive-shaft
wleded diff
silk road coil overs
17x9.5 rear 17x9 front rota grids
s14 inner and outer tie rods
tein adjustable tension rods
powered by max skid plate
walboro 255 pump
return fuel system
fpr
stock tubular headers
heat wrapped
custom 2.5" y pipe
apexi n1 dual exhaust
mishmoto 66o thermostat
koyo rad
2x12" electric fans
the bads
body needs tlc but what s13 doesnt...
tac and speedo doesn't work but with a Dakota digital converter they can work properly














Last edited by katillidie; Aug 24, 2012 at 06:51 PM. Reason: change something
Define "backseat"
My HR has SOMEwhat of a backseat if you're short and dont mind being bungee corded in......
hahaha, I would LOOOOVE to have this car.. I just wouldnt know what to call it? Z13? COuldnt call it a 240Z......hmmmmm glws op!
My HR has SOMEwhat of a backseat if you're short and dont mind being bungee corded in......
hahaha, I would LOOOOVE to have this car.. I just wouldnt know what to call it? Z13? COuldnt call it a 240Z......hmmmmm glws op!
Last edited by NoQuestionZ; Aug 26, 2012 at 09:18 PM.
Trending Topics
lol a back eat that can accommodate at least 1 kid safely and legally, my oldest can sit up front now!
350sx is what I called mine single throttle though....
Thread
Thread Starter
Forum
Replies
Last Post





