A CJM Twin Fuel Pump
Originally Posted by Blackbird CPV35
dumb question, but how do these feed to the rails? do they have a single pump feeding each rail like the aps kit, or do they merge together somewhere prior to the rails
Originally Posted by eagletanggreen
You have to make your own feed lines!
interesting, so in theory i can completely bypass buying the CJM Stage 2 hard line and just use 2 AN feed lines going straight to the rails
Originally Posted by Blackbird CPV35
interesting, so in theory i can completely bypass buying the CJM Stage 2 hard line and just use 2 AN feed lines going straight to the rails
Would just need a Y on the feed end like it has on the rail end.
Originally Posted by Philthy
looks sweet...
definitely get George a hot pink one and engrave 'you are gay' all over it...
definitely get George a hot pink one and engrave 'you are gay' all over it...
Too bad you are so far bro, it would be awesome to have a photo shoot once we both get our cars back!
-George
GT Motorsports
Thread Starter
CJ Motorsports
iTrader: (21)
Joined: Apr 2003
Posts: 3,997
Likes: 3
From: West Chicago, IL
will post more tomorrow, gotta sleep!
just wanted to say that i would recommend Y'ing them together and then Y'ing them apart again. Personally, I would never run one pump to each rail without joining them together. This is to ensure even pressure characteristics under every single possible circumstance to each bank.
just wanted to say that i would recommend Y'ing them together and then Y'ing them apart again. Personally, I would never run one pump to each rail without joining them together. This is to ensure even pressure characteristics under every single possible circumstance to each bank.
Last edited by phunk; Dec 18, 2007 at 11:34 PM.
Originally Posted by phunk
I think this is the one that left for SGP today. Just figured some guys would be curious to see some updated photos. Level sensor was put on just for the pics.
Who's welding it all together?
Sponsor
Sound Performance
Sound Performance
Joined: Apr 2006
Posts: 541
Likes: 1
From: Bloomingdale, IL
That looks great Charles..... but we need three pumps for our car. 2 will not support the HP we are looking to make. None of this sub 1000RWHP baby crap!! Can you squeeze 3 in there? 
Lar
Lar
Originally Posted by SoundPerformance
That looks great Charles..... but we need three pumps for our car. 2 will not support the HP we are looking to make. None of this sub 1000RWHP baby crap!! Can you squeeze 3 in there?
Lar
Lar
Thread Starter
CJ Motorsports
iTrader: (21)
Joined: Apr 2003
Posts: 3,997
Likes: 3
From: West Chicago, IL
Originally Posted by thawk408
What about 2 bosch 044s?