What have you done for your Z today?
350Z/370Z Tech Moderator
MY350Z.COM
MY350Z.COM
Got the Akebonos up. Unfortunately Z1 shipped me the wrong bolts so I had to go to the hardware store and pick up the correct ones. They never answer emails so I figured it would take a month to get 4 bolts
Also did a test fit on RPF 1 and had some rubbing on the barrel. Everyone said they should fit fine but I had to get out the grinder. Luckily it didn't take much. Have a racing stripe on the inner barrel now...
Also did a test fit on RPF 1 and had some rubbing on the barrel. Everyone said they should fit fine but I had to get out the grinder. Luckily it didn't take much. Have a racing stripe on the inner barrel now...
New Member
iTrader: (1)
No I didn't check the template. Just went by what everyone on here said.
It doesn't rub much at all, its just enough to take the paint off the wheels when you rotate. No scratches or gouges, can't even feel it with a finger nail. I had a couple sharp edges on the calipers, might be abnormal I dunno.
It doesn't rub much at all, its just enough to take the paint off the wheels when you rotate. No scratches or gouges, can't even feel it with a finger nail. I had a couple sharp edges on the calipers, might be abnormal I dunno.
New Member
There is no axel in the front though.......
New Member
iTrader: (1)
Lol beat me too it.
Hung new garage lights, touched up the paint on one rim from rubbing the caliper, got the rest of the brakes installed. Going to test fit the rest of the rims and then tackle the stainless brake lines
Hung new garage lights, touched up the paint on one rim from rubbing the caliper, got the rest of the brakes installed. Going to test fit the rest of the rims and then tackle the stainless brake lines
I adjusted air pressures.
Low 60's and blue sky's here on the CO front-range today. I did nothing but take it out and put heat in it and scrub the new rubber lightly.
Pretty sure I gained another ~5-10 HP due to the addition of my clear side markers installed yesterday though (I really hated the OEM orange)!
Low 60's and blue sky's here on the CO front-range today. I did nothing but take it out and put heat in it and scrub the new rubber lightly.
Pretty sure I gained another ~5-10 HP due to the addition of my clear side markers installed yesterday though (I really hated the OEM orange)!
The following users liked this post:
BluestreamDE (01-29-2017)
6 inch cawk is my fave!
iTrader: (3)
6 inch cawk is my fave!
iTrader: (3)
Ok ill share some pics...
Took these off...
Got some extra wires
Got a bunch of stuff in the corner...
Extra driveshaft
These things
More stuff
Etc etc etc
Took these off...
Got some extra wires
Got a bunch of stuff in the corner...
Extra driveshaft
These things
More stuff
Etc etc etc
Registered User
Join Date: Aug 2016
Location: Pueblo West, Colorado
Posts: 439
Likes: 0
Received 31 Likes
on
27 Posts
I adjusted air pressures.
Low 60's and blue sky's here on the CO front-range today. I did nothing but take it out and put heat in it and scrub the new rubber lightly.
Pretty sure I gained another ~5-10 HP due to the addition of my clear side markers installed yesterday though (I really hated the OEM orange)!
Low 60's and blue sky's here on the CO front-range today. I did nothing but take it out and put heat in it and scrub the new rubber lightly.
Pretty sure I gained another ~5-10 HP due to the addition of my clear side markers installed yesterday though (I really hated the OEM orange)!
What part of CO you in? I work graveyards and just woke up. I would love to have bathed Zeke properly today :/
Northern low-lands bother, Roxborough. That pic is ~20 miles SW of Denver metro (I reside near the entrance of Waterton Canyon). Moved here 4 years ago from Southwest Conifer, 9300', no O2, hard-core snow and no roadsters up high...I'm makin' up for lost time with the Z.
Registered User
Join Date: Aug 2016
Location: Pueblo West, Colorado
Posts: 439
Likes: 0
Received 31 Likes
on
27 Posts
Northern low-lands bother, Roxborough. That pic is ~20 miles SW of Denver metro (I reside near the entrance of Waterton Canyon). Moved here 4 years ago from Southwest Conifer, 9300', no O2, hard-core snow and no roadsters up high...I'm makin' up for lost time with the Z.
You've been here for years so at least I don't really need to tell you that washing your car is only going to jinx us and bring on more snow. Lmao ;-)
Registered User
Join Date: Aug 2016
Location: Pueblo West, Colorado
Posts: 439
Likes: 0
Received 31 Likes
on
27 Posts
New Member
iTrader: (1)
Should I install my coils now on stock meat?
Or should I wait until I get my 18x9.5 enkies??
I keep opening the box then closing it cause I feel like I should do the 2 together rather than just install them on stock wheels and tires. Looks and preformance difference wise.
Or should I wait until I get my 18x9.5 enkies??
I keep opening the box then closing it cause I feel like I should do the 2 together rather than just install them on stock wheels and tires. Looks and preformance difference wise.