FS/FT: Agressive Riverside MAE
#1
Registered User
Thread Starter
iTrader: (6)
Join Date: Dec 2007
Location: dallas, texas
Posts: 808
Likes: 0
Received 0 Likes
on
0 Posts
Agressive Riverside MAE
Time to revert back to stock or as close to stock as possible.
I have up for sale a set of Riverside MAE's.
sizing - 19x9.5 -35 ish 19x10.5 -47 ish (rough estimate)
5x114.3
super low pads, no center caps
unsure of the actual sizing due to them originally being 9.5 +11 and 10.5 +23 with high pads. I had 3 piece wheel repair of Dallas TX shave the pads down 24 mm's. They had custom inserts fabricated for the lugs to mount. I have driven on them for 3 months now and they hold up just fine. I reversed the face for max lippage. currently about 5.75" lips out front and 6.75" lips on the rears. Will not clear big brake kits, so will need spacers. I had them on a base model 350z with no spacers. the inside barrel of the wheels have small bends and curbage but hold air just fine. rears will need new tires...fronts have camber wear but are ok to have tires flipped.
faces were painted silver and cleared. lips were sanded to give a bare metal/brushed aluminum look.
if any questions contact me yoshi at 2145492235 text is preferred.
these need to be gone soon!!!
wheels outright 1600.
i can send more pics upon request if needed. contact number is above picture set.
Thanks for looking!
I have up for sale a set of Riverside MAE's.
sizing - 19x9.5 -35 ish 19x10.5 -47 ish (rough estimate)
5x114.3
super low pads, no center caps
unsure of the actual sizing due to them originally being 9.5 +11 and 10.5 +23 with high pads. I had 3 piece wheel repair of Dallas TX shave the pads down 24 mm's. They had custom inserts fabricated for the lugs to mount. I have driven on them for 3 months now and they hold up just fine. I reversed the face for max lippage. currently about 5.75" lips out front and 6.75" lips on the rears. Will not clear big brake kits, so will need spacers. I had them on a base model 350z with no spacers. the inside barrel of the wheels have small bends and curbage but hold air just fine. rears will need new tires...fronts have camber wear but are ok to have tires flipped.
faces were painted silver and cleared. lips were sanded to give a bare metal/brushed aluminum look.
if any questions contact me yoshi at 2145492235 text is preferred.
these need to be gone soon!!!
wheels outright 1600.
i can send more pics upon request if needed. contact number is above picture set.
Thanks for looking!
Last edited by fatboy.yoshi; 07-04-2011 at 01:47 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
CarbonZ
Intake Exhaust
2
03-03-2004 06:33 PM