[DFW]: DFW's Lounge
Living in 350Z
iTrader: (64)
Registered User
iTrader: (2)
Join Date: Dec 2008
Location: Dallas, Texas
Posts: 781
Likes: 0
Received 0 Likes
on
0 Posts
Registered User
iTrader: (2)
Join Date: Dec 2008
Location: Dallas, Texas
Posts: 781
Likes: 0
Received 0 Likes
on
0 Posts
yeah as a paperweight
General & Tech Moderator
MY350Z.COM
MY350Z.COM
iTrader: (4)
I have the same noise at low speeds going down my bumpy alley where it can echo off fences. One thing I heard was torquing down bolts with the wheels in the air maybe causes it.
Living in 350Z
iTrader: (64)
I saw them in person - just wait til you see the drop I did on it..he did his homework. I did the extended studs up front and rolled the fenders in the rear and put the car on BC coilovers.. He rolled out PIMP style - loooked DAMN GOOD!
Ahem! NEXX I just got the HF ones for .....lemme see....uh.....5 bucks!
Ahem! NEXX I just got the HF ones for .....lemme see....uh.....5 bucks!
General & Tech Moderator
MY350Z.COM
MY350Z.COM
iTrader: (4)
Gotta give a quick shout out before shower/food/sleep to everyone who helped me on this project. In more or less chronological order.
1. Stephen (ImportedPerformance) - Hooked me up with the sweet Rays lugs.
2. Chris (Fithamoto) - Got me in touch with the wheel/tire guy, huge plus there.
3. Eric (WheelFix) - Superb paint job, wheels, tires, TPMS. No more shimmy at higher speeds, even with spacers added now.
4. Jake (AcidJake75) - For taking so much time out of his day to get all the final touches done and a great install/fender roll.
Highlight of it all, taking the on-ramp from PGBT to the tollway at ~80mph and the only body roll was me trying to not fall over.
Hopefully I got everyone on this forum who helped, definitely great people to work with. I'm shooting for some pics tomorrow in the daytime.
1. Stephen (ImportedPerformance) - Hooked me up with the sweet Rays lugs.
2. Chris (Fithamoto) - Got me in touch with the wheel/tire guy, huge plus there.
3. Eric (WheelFix) - Superb paint job, wheels, tires, TPMS. No more shimmy at higher speeds, even with spacers added now.
4. Jake (AcidJake75) - For taking so much time out of his day to get all the final touches done and a great install/fender roll.
Highlight of it all, taking the on-ramp from PGBT to the tollway at ~80mph and the only body roll was me trying to not fall over.
Hopefully I got everyone on this forum who helped, definitely great people to work with. I'm shooting for some pics tomorrow in the daytime.
Sleeps in 350Z
iTrader: (24)
Join Date: Mar 2007
Location: Flower Mound , TX
Posts: 5,745
Likes: 0
Received 0 Likes
on
0 Posts
I saw them in person - just wait til you see the drop I did on it..he did his homework. I did the extended studs up front and rolled the fenders in the rear and put the car on BC coilovers.. He rolled out PIMP style - loooked DAMN GOOD!
Ahem! NEXX I just got the HF ones for .....lemme see....uh.....5 bucks!
Ahem! NEXX I just got the HF ones for .....lemme see....uh.....5 bucks!
Good Job on the extended studs & fender rolling ! pimp dawg !
Gotta give a quick shout out before shower/food/sleep to everyone who helped me on this project. In more or less chronological order.
1. Stephen (ImportedPerformance) - Hooked me up with the sweet Rays lugs.
2. Chris (Fithamoto) - Got me in touch with the wheel/tire guy, huge plus there.
3. Eric (WheelFix) - Superb paint job, wheels, tires, TPMS. No more shimmy at higher speeds, even with spacers added now.
4. Jake (AcidJake75) - For taking so much time out of his day to get all the final touches done and a great install/fender roll.
Highlight of it all, taking the on-ramp from PGBT to the tollway at ~80mph and the only body roll was me trying to not fall over.
Hopefully I got everyone on this forum who helped, definitely great people to work with. I'm shooting for some pics tomorrow in the daytime.
1. Stephen (ImportedPerformance) - Hooked me up with the sweet Rays lugs.
2. Chris (Fithamoto) - Got me in touch with the wheel/tire guy, huge plus there.
3. Eric (WheelFix) - Superb paint job, wheels, tires, TPMS. No more shimmy at higher speeds, even with spacers added now.
4. Jake (AcidJake75) - For taking so much time out of his day to get all the final touches done and a great install/fender roll.
Highlight of it all, taking the on-ramp from PGBT to the tollway at ~80mph and the only body roll was me trying to not fall over.
Hopefully I got everyone on this forum who helped, definitely great people to work with. I'm shooting for some pics tomorrow in the daytime.
Stu, get some pics up of those Biotches ! I bet that thing handles sweet now. You should be able to Auto-cross now.....right ?
Living in 350Z
iTrader: (64)
I love your FX Stu. Thing has NO UCA's. It has knuckles like the 240sx. I couldnt believe it. The drop that came with the BC coilovers was spot on - looked gorgeous. I hope you didnt rub any (even with all them wheels and tires in the back)
J- I used my ball joint to remove the studs and it worked like a f*kin CHAMP man.. I took pics. will post later (dont have my camera with me)
J- I used my ball joint to remove the studs and it worked like a f*kin CHAMP man.. I took pics. will post later (dont have my camera with me)
Super Moderator
MY350Z.COM
MY350Z.COM
Fall semester starts today, and I'm taking my Civil Service exam for FWPD again later this evening...
Super Moderator
MY350Z.COM
MY350Z.COM
Thanks Nuge! It shouldn't be too bad, I got up to backgrounds last year until I gave up my spot for personal reasons(was going through crap with the b* ex). There was 1,400+ applicants and I was one of the 100 remaining. Now it's game time again...
Last edited by verdict.; 08-31-2010 at 05:09 AM.
Sleeps in 350Z
iTrader: (5)
General & Tech Moderator
MY350Z.COM
MY350Z.COM
iTrader: (4)
I'll snap some quick ones before I leave just to have something.
350Z-holic
iTrader: (60)
Join Date: Jan 2006
Location: San Antonio/I miss DFW, TX
Posts: 11,204
Likes: 0
Received 29 Likes
on
20 Posts
I love your FX Stu. Thing has NO UCA's. It has knuckles like the 240sx. I couldnt believe it. The drop that came with the BC coilovers was spot on - looked gorgeous. I hope you didnt rub any (even with all them wheels and tires in the back)
J- I used my ball joint to remove the studs and it worked like a f*kin CHAMP man.. I took pics. will post later (dont have my camera with me)
J- I used my ball joint to remove the studs and it worked like a f*kin CHAMP man.. I took pics. will post later (dont have my camera with me)
-J