Hi Z member's. I need some help getting my "eManage Blue" and the "Autosport ECU Harness" wired together. I will realy appreciated if any one in here has that information and wants to share it with me. Thank You...

 

I found at this website a link (http://www.mohdparts.com/emanage/#Ho...n%20Your%20Car that has a write up someone did about the installation procedure for a Nissan 350Z. The only problem I'm having with this instructions are that the pin configuration that this write up shows for the connector don't match the configuration I have in the harness I got with the GReddy eManage Blue.

 

Do you have a copy of the service manual? It has all the pin diagrams you could ask for
That is how I checked all the wiring for my EU

 

This might help

 

This also .... but you have to double check on the rotory switch setting .. it might be (7 0 B) with the new software update

 

I have a harness that consist of 2 separate harness. The first one consist of 9 wires of solid colors and the second one has also 9 wires with solid color plus a stripe. Are this the normal wires that come with the "GReddy eManage Blue". Also guys, Do you know, How can I get a hold of a new 18 PIN connector compatible with the eManage Blue because I damage the one I have now the little cables don't stay in. Anyone can help me, please.

 

I just installed one last week for a buddy of mine. Give me a call and we can work something out for ya! 361-652-6652


.

 

Hey Bill this is a picture of what my eManage set up looks like. Sorry to the Z member that this picture belong too, I borrow it for illustration purpose only.

Jose

 

The picture came from Todd (x350zDCalbx) I believe.

I know what the emanage looks like, but thanks for the picture

I gave you my phone number, so give me a call if you need something else as I may not continue to check this continually.

.