2007 ECU Testers needed: JDM version complete. need US spec cars.
Thread Starter
Joined: Aug 2002
Posts: 10,681
Likes: 11
From: Redondo Beach, CA
2007 ECU Testers needed: JDM version complete. need US spec cars.
UPDATED 9/17/2007
Technosquare has unlocked the 2007 JDM z33 ECU!!!
what we need now are the US spec 2007 cars to begin the programming:
what we need from you: VOLUNTEERS!! all Trim levels.
If you'd like TWO FREE ecu tune for your 2007 350z or G35 or NISMO edition 350z here's what Technosquare needs from you
1. your ECU for two weeks. The ECU will be sent to Japan for decoding/downloading process and then will be sent back to you. All Shipping charges will be paid for by Technosquare.
2. the ecu will be mailed back to you in stock form. Allow for a few weeks for tuning/hacking state side and then we'll be ready to send you back the ECU.
3. if you are LOCAL to southern california, free DYNO tuning is available to get peak hp output in stock form.
if interested, please contact me via PM / Email or call Tadashi directly at
310-787-0847
thank you
cheston
Technosquare has unlocked the 2007 JDM z33 ECU!!!
what we need now are the US spec 2007 cars to begin the programming:
what we need from you: VOLUNTEERS!! all Trim levels.
If you'd like TWO FREE ecu tune for your 2007 350z or G35 or NISMO edition 350z here's what Technosquare needs from you
1. your ECU for two weeks. The ECU will be sent to Japan for decoding/downloading process and then will be sent back to you. All Shipping charges will be paid for by Technosquare.
2. the ecu will be mailed back to you in stock form. Allow for a few weeks for tuning/hacking state side and then we'll be ready to send you back the ECU.
3. if you are LOCAL to southern california, free DYNO tuning is available to get peak hp output in stock form.
if interested, please contact me via PM / Email or call Tadashi directly at
310-787-0847
thank you
cheston
Last edited by Chebosto; Sep 17, 2007 at 11:38 AM.
Thread Starter
Joined: Aug 2002
Posts: 10,681
Likes: 11
From: Redondo Beach, CA
here's the time line break down:
0. Package your ECU and ship, all expenses paid for by technosquare.
1. upon receipt of your ECU it will be repackaged in a static-free bag and air freight to Techtom Japan, Technosquare INC's Parent Japanese firm.
2. The information on your ecu will be downloaded and compared to the JDM units.
3. Your ECU is repackaged and air freight back to TechnoSquare in the USA.
4. Techtom sends the downloaded data to Technosquare and Tadashi begins his 'magic' of changing the numbers
5. Your ECU is sent back to you in the same condition it was received so you can drive your car
6. Upon completetion of the new ECU program (i.e. it's ready for public release) you can send your ecu back in again to technosquare, preferrably with a Dyno and an AFR graph, the new program will be loaded free of charge, and the ECU returned to you.
Turn around time from Japan varies depending on speed of the airfreight. Typically it is less than 2 weeks.
We desperately need So CAL 07s since we can only verify changes to the ecu code on the chassis dyno in house @ Technosquare. All So Cal volunteers: This Dyno Tune Service will be absolutely free..
0. Package your ECU and ship, all expenses paid for by technosquare.
1. upon receipt of your ECU it will be repackaged in a static-free bag and air freight to Techtom Japan, Technosquare INC's Parent Japanese firm.
2. The information on your ecu will be downloaded and compared to the JDM units.
3. Your ECU is repackaged and air freight back to TechnoSquare in the USA.
4. Techtom sends the downloaded data to Technosquare and Tadashi begins his 'magic' of changing the numbers
5. Your ECU is sent back to you in the same condition it was received so you can drive your car
6. Upon completetion of the new ECU program (i.e. it's ready for public release) you can send your ecu back in again to technosquare, preferrably with a Dyno and an AFR graph, the new program will be loaded free of charge, and the ECU returned to you.
Turn around time from Japan varies depending on speed of the airfreight. Typically it is less than 2 weeks.
We desperately need So CAL 07s since we can only verify changes to the ecu code on the chassis dyno in house @ Technosquare. All So Cal volunteers: This Dyno Tune Service will be absolutely free..
Trending Topics
Thread Starter
Joined: Aug 2002
Posts: 10,681
Likes: 11
From: Redondo Beach, CA
Originally Posted by LeMans350z
I am not going to be able to do it. My car needs to be able to put the top up/down at the bodyshop.
J
J
i dont see how you need an ecu for that though, thats just power supplied to the right servos....
hopefully other people will step up..
Originally Posted by Chebosto
i dont see how you need an ecu for that though, thats just power supplied to the right servos....
hopefully other people will step up..
hopefully other people will step up..
even windows, interior lights, etc. Well, at least you can CONTROL everything by hacking the BCM
i.e. with Cipher
