GTM Performance Engineering 350Z HR SUPERCHARGER KIT PRESS RELEASE
03-29-2012, 07:55 AM
#381
After looking at the stg 2 dyno numbers for the HR I am committed and saving for the kit. There are a few things I need first, clutch, 3.3 gears and quaife diff but I will be getting the kit. Over 500hp and 375tq is very nice. Was actually thinking of selling the Z and getting a C5 ZO6 but I think I just changed my mind.
.
Last edited by djamps; 03-29-2012 at 07:56 AM.
03-29-2012, 09:07 AM
#382
Registered User
iTrader: (10)
Join Date: Feb 2009
Location: puyallup WA
Posts: 3,016
Likes: 0
Received 0 Likes
on
0 Posts
After looking at the stg 2 dyno numbers for the HR I am committed and saving for the kit. There are a few things I need first, clutch, 3.3 gears and quaife diff but I will be getting the kit. Over 500hp and 375tq is very nice. Was actually thinking of selling the Z and getting a C5 ZO6 but I think I just changed my mind.
03-31-2012, 11:34 AM
#385
Registered User
iTrader: (17)
Join Date: Apr 2011
Location: Socal
Posts: 824
Likes: 0
Received 0 Likes
on
0 Posts
yea c5 z06 arent that fast,i did a mild build on my friends aggresive cam port and polished heads with oversized valves fast intake manifold bigger tb and an intake and injectors and tune and it put down 455 on a mustang. z with a stage take pretty much most c5 z06's unless they were fi
04-02-2012, 01:13 AM
#386
Registered User
Join Date: Jan 2011
Location: ITA
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
04-03-2012, 06:17 AM
#387
Registered User
Join Date: Jan 2011
Location: Vancouver BC
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Sweet vid. lol @ 1:50 getting a little sideways! If anyone is intrested in the install, you can find it here in my thread in the nismo section.
https://my350z.com/forum/nismo-350z/...mo-1033-a.html
https://my350z.com/forum/nismo-350z/...mo-1033-a.html
04-03-2012, 08:59 PM
#388
Registered User
Join Date: Apr 2007
Location: Renton WA
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
My kit just arrived today, just waiting for the Cipher cable and then we begin playing frankenstein in the garage.
Time to brew up a bad case of "I can't go to work" flu.
Time to brew up a bad case of "I can't go to work" flu.
04-18-2012, 09:43 AM
#390
Registered User
iTrader: (6)
Join Date: Dec 2009
Location: Edmonton, Alberta
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Got my kit fully installed! Give props to GTM for putting together a very nice kit, everything fit as it should and the instructions made the install rather straight forward. Completed the entire install in my garage with help from a friend in about 16-18 hours once everything is completed. Just waiting on my heavy duty slave so i can put the tranny back in and start the break in!
....Wish I would have known about this stage 1.5 when i ordered my kit!
....Wish I would have known about this stage 1.5 when i ordered my kit!
04-27-2012, 11:11 PM
#391
Registered User
Join Date: Jul 2009
Location: Finland
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
Got my kit fully installed! Give props to GTM for putting together a very nice kit, everything fit as it should and the instructions made the install rather straight forward. Completed the entire install in my garage with help from a friend in about 16-18 hours once everything is completed. Just waiting on my heavy duty slave so i can put the tranny back in and start the break in!
....Wish I would have known about this stage 1.5 when i ordered my kit!
....Wish I would have known about this stage 1.5 when i ordered my kit!
Any updates? photos/videos??
04-29-2012, 07:49 PM
#392
Registered User
iTrader: (6)
Join Date: Dec 2009
Location: Edmonton, Alberta
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Got everything pretty much finished up on the weekend. However, having issues loading the Osiris tune. Says "Cable License Error." Waiting to call Sam Monday morning. Hopefully it's a quick fix, getting quite anxious.
On a side note, the heavy duty slave and master cylinder(Wilwood) from ZSpeed are some nice pieces. Install is pretty straight forward and it now has a steel braided line running right from the MC to the slave.
On a side note, the heavy duty slave and master cylinder(Wilwood) from ZSpeed are some nice pieces. Install is pretty straight forward and it now has a steel braided line running right from the MC to the slave.
04-29-2012, 11:30 PM
#394
Registered User
iTrader: (6)
Join Date: Dec 2009
Location: Edmonton, Alberta
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
600cc Injectors
Oil filter relocation
Setrab Supercharger oil cooler / Setrab 25R Oil Cooler
ZSpeed Heavy Duty CSC
ZSpeed Heavy Duty Wilwood Master Cylinder
The supercharger inlet pipe worries me a little, by far the lowest part on the car now. Sits almost 1" under the cross member!
Replaced the supplied filter, way to small! Jammed the biggest one that fit. K&N - RE 0910
Oil filter relocation
Setrab Supercharger oil cooler / Setrab 25R Oil Cooler
ZSpeed Heavy Duty CSC
ZSpeed Heavy Duty Wilwood Master Cylinder
The supercharger inlet pipe worries me a little, by far the lowest part on the car now. Sits almost 1" under the cross member!
Replaced the supplied filter, way to small! Jammed the biggest one that fit. K&N - RE 0910
04-30-2012, 12:27 AM
#395
Registered User
Join Date: Jan 2011
Location: ITA
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
08-31-2012, 01:46 PM
#400
Dont pay in full first
Whatever you do, DON'T pay in full first before receiving your parts from GTM as I did...They won't give me the 649.80 worth of parts I paid for and the BB was contacted and a complaint filed. When Sam was asked about why he won't return the parts, he replied "Why should I help him (me)?".
Shows you his reputation... I paid for parts and he won't deliver them. Sam will tell you EVERYTHING BUT THE TRUTH..SOMEBODYS MOMMA DIED, SOMEONE IS SICK, HAD SURGERY ETC ETC...do not do business with them!
EDITED: HAPPY LABOR DAY WEEKEND
Shows you his reputation... I paid for parts and he won't deliver them. Sam will tell you EVERYTHING BUT THE TRUTH..SOMEBODYS MOMMA DIED, SOMEONE IS SICK, HAD SURGERY ETC ETC...do not do business with them!
EDITED: HAPPY LABOR DAY WEEKEND
Last edited by Chebosto; 09-01-2012 at 10:14 AM. Reason: keepin' it civil.