revised HR build :D
10-26-2011, 05:23 PM
#81
Registered User
Thread Starter
iTrader: (10)
Join Date: Feb 2009
Location: puyallup WA
Posts: 3,016
Likes: 0
Received 0 Likes
on
0 Posts
You don't even know lol. Killed me not having a car this summer XD. I'll see if I can get the shop to snag a few more for me I haven't been able to stop by the shop this week been swamped at work
10-27-2011, 07:49 PM
#82
Registered User
Thread Starter
iTrader: (10)
Join Date: Feb 2009
Location: puyallup WA
Posts: 3,016
Likes: 0
Received 0 Likes
on
0 Posts
Motors pretty much done and ready. fittings came today for the casting block coolant mod so all the turbo lines and everything should be hooked up tommorow 
11-15-2011, 09:18 AM
#96
Registered User
Thread Starter
iTrader: (10)
Join Date: Feb 2009
Location: puyallup WA
Posts: 3,016
Likes: 0
Received 0 Likes
on
0 Posts
on a side note, talked to stoptech at sema and they hooked it up with a killer deal on some brakes. Have some 6 pot front 4 pot rear with stainless lines on the way as we speak. stock non brembos werent gonna cut it XD
11-29-2011, 09:00 PM
#99
Registered User
Thread Starter
iTrader: (10)
Join Date: Feb 2009
Location: puyallup WA
Posts: 3,016
Likes: 0
Received 0 Likes
on
0 Posts
motors in everything is hooked up pumps are wired fluids are in. not wanting to fire though and it does have a CEL. was getting late thought so we called it a night running the codes in the morning and hopefully have it up and running and a base tune on it to start break in
. more info in the morning tommorow
11-30-2011, 11:21 PM
#100
Registered User
Thread Starter
iTrader: (10)
Join Date: Feb 2009
Location: puyallup WA
Posts: 3,016
Likes: 0
Received 0 Likes
on
0 Posts
car is home in the garage got it wrapped up tonight
break in tune is on it right now. Small issue though with the cjm twin pump. to keep the fuel temperature code from going off you have to put in a 2.4 ohm resistor. did that when wiring it up and it works fine but still getting that code. thinking maybe for the HR it needs a different resistor to solve this issue? going to call Charles tommorow and see what we need to change.
break in tune is on it right now. Small issue though with the cjm twin pump. to keep the fuel temperature code from going off you have to put in a 2.4 ohm resistor. did that when wiring it up and it works fine but still getting that code. thinking maybe for the HR it needs a different resistor to solve this issue? going to call Charles tommorow and see what we need to change.