Just curious?

 

Im running 295/35/18 in the rear...

Fits fine... as long as you chop away your fender...

My wheels are 18x10.5 +30mm

 

i saw a magazine put 305's all the way around.

i have 285's rear and no problems

 

Yes, but it depends on the offset of your wheel.





No rubbing and no fender rolling/cutting for me. And I have tracked this setup with no rubbing on stock suspension.

 

I'm running 275/45zr18's with 18x10.5 rims +25mm offset and there is plenty of room for an extra 20mm(that's a little less than an inch). Alot of people are using a 30 offset with their rims, the problem with that is the wheels stick out and throw dirt all over the car and it causes the tires to scrub

 

Wouldn't a +30 offset tuck the wheels in more than a +25 offset?

 

I just put 295's on my Volk CE28's 19X9.5 et+25. The car is lowered and the fenders are rolled and have no issues. This setup surprisingly cleared the fender before I rolled it. I just decided to be extra safe... -Giovanni

 

I've got 295's on 10.5" rims and lowered 3/4". No rubbing. I have not rolled the fenders. Offset of 30mm. Camber is at 1.5.

 

I got 295's, lowered one inch, tracked it several times, no rubbing and no rolled fenders.......

 

if your curious...

https://my350z.com/forum/showthread....threadid=86159

 

That's what I wanted to hear!

Thanks for ALL the replied guys.

Now then....... This appears to be a VERY uncommon size with only Continental and Pirreli. Neither of which I want.

Skrill,

I'm digging your tires! What are they?

 

Kuhmo MX -- only available in 18" fitments.

 

im going to but 305/30/18 on next...