07maximan

iTrader: (3)

Ok cool,like always thanks for the help!

terrasmak

iTrader: (8)

Tell then you want a 9.5 +15 front wheel, then they would be designed for a Z.

07maximan

iTrader: (3)

They didnt have them in 9.5 only 8.5"

Canada_Z

Varrstoen ES2's
19x10 et15 245/35
19x11 et15 275/35
BC BR coils.

icon420

new to wheels & tires and have a ? can i run a 19x10 front & 19x11 rear with 0 offset's without rolling fenders & wrecking my suspensions ride? i only sit about an inch lower than stock

terrasmak

iTrader: (8)

You will need a roll in the rear, and extra front camber.

07maximan

iTrader: (3)

Im shopping for tires for my 19x11 +18 Stance wheels. You guys said I would have to roll my fenders for these to work. I cant find any one close enough to me to do this.Well, I did find one place but they wanted to do the base ball bat method....anyway is there a tire I could use so I dont have to roll the fenders? I was told to use a 285/35/19 on the rears. Would a 265 work?

BIGPOPPAPUMP

I have these wheels. 19X9.5 & 11.5 in the rear. I run a 275 in back & a 245 up front. Lowered an inch, no rubbing. I think I got mine for........... Email this guy at KICKSTART MOTORSPORTS, INC.
eric@wheelstudio.com
That is his email & tell him the guy from invoice # 14675 sent you. He has fitted many & hooked me up. Tell him I sent you.

07maximan

iTrader: (3)

I dont see any wheels....


Are you saying youre running an 11.5" wheel in the rear and you didnt roll your fenders??

BIGPOPPAPUMP

YES. Looks like wheelstudio.com. Call them, ask to talk to Eric. They are in cali. This config was made for our cars. I run stance coil overs & am lower than an inch & do not rub.

BIGPOPPAPUMP

I actually rub the underside of my car than the wheels. I will post a pic on my page

BIGPOPPAPUMP

look at my albums. The M310's are designed for our car.

07maximan

iTrader: (3)

Nice wheels. Any idea how much clearance you have between the tire and the fender?

Phenom

iTrader: (4)

There's no way 275s aren't rubbing unless you have some weak offsets or a lot of neg camber.

07maximan

iTrader: (3)

I thought it was kind of strange as well. Especially with an 11.5" wheel.

Robert_K

iTrader: (25)

<~ Running a 305/35 on a 19x11 and not rubbing.

07maximan

iTrader: (3)

What's the offset?

I'm confused. You guys keep saying "your not rubbing", rubbing can occur in a few different places. I'm only concerned about rolling fenders. So you're saying your fenders are not rolled?

Robert_K

iTrader: (25)

265/35/19x9.5 +20
305/35/19x11 +25 rolled fenders.
KW V3 w/ F&R SPL Camber arms.
Square alignment. (Don't know actual numbers)

icon420

anyone running these?

STL 350Z

iTrader: (3)

Looks like a truck wheel lol