Work Wheels Thread
#1049
Registered User
Join Date: Dec 2012
Location: Northern Ireland
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
I'm looking to buy a set of work euroline dh's but I'm unsure if they will clear the Oem brembos
Sizes are :
19x10
19x11
Both with an et of 12-15
Any help much appreciated
Sizes are :
19x10
19x11
Both with an et of 12-15
Any help much appreciated
![Smilie](https://my350z.com/forum/images/smilies/smile.gif)
#1050
New Member
iTrader: (1)
Join Date: Jul 2011
Location: Houston
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Please don't get those donk *** wheels. But if you do, stoptech has wheel sizing sheets that you can print out and see if the stoptech kit will fit.
I know it's not OEM brembo, but the stoptechs are comparable in size.
I know it's not OEM brembo, but the stoptechs are comparable in size.
#1052
Registered User
Join Date: Dec 2012
Location: Northern Ireland
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
I'm ordering them from Japan so I just want to make sure i order the right disk and stil maintain maximum dish and offset etc.
I'd cry if I ordered a set and they wouldn't clear the brembos
I'd cry if I ordered a set and they wouldn't clear the brembos
#1053
Vendor - Former Vendor
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Brake clearance is a bit of a grey zone if you don't have the wheels in front of you, as the disk type will be one of the deciding factors. Have you messaged Work about this particular wheel's brake clearance?
#1054
Registered User
Join Date: Dec 2012
Location: Northern Ireland
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
I haven't yet, I messaged a local firm that specialises in rare or hard to find wheels direct from Japan. They can get them ok, but I'm not sure if they would be too informed of the disk face variations.
I might just end up with varrstoens instead lol
I might just end up with varrstoens instead lol
#1056
Registered User
![Default](https://my350z.com/forum/images/icons/icon1.gif)
If you don't get high disk, they will not clear your brembos. Stock sizing (i.e., your run of the mill Work sizing) will not clear the brembos. I'd just toss a 5mm spacer on there and call it a day.
What are your offsets? If they're not aggressive, then you can get away with a spacer without poke and camber. If they are, then you'll have to do some stuff and some things.
edit: why don't you just tell'em you've got brembos if you're having work build them for you. that's clear all of this up.
What are your offsets? If they're not aggressive, then you can get away with a spacer without poke and camber. If they are, then you'll have to do some stuff and some things.
edit: why don't you just tell'em you've got brembos if you're having work build them for you. that's clear all of this up.
#1057
Registered User
Join Date: Dec 2012
Location: Northern Ireland
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Thanks for the reply.
I was planning on buying a used set from a local wheel importer (similar to vrwheels for example)
I was planning on :
19x10 et12
19x11 et12 or as near as. But I was thinking if I put maybe a 22 on the front I could get a 10mm spacer
I really want to sacrifice as little dish as possible
I was planning on buying a used set from a local wheel importer (similar to vrwheels for example)
I was planning on :
19x10 et12
19x11 et12 or as near as. But I was thinking if I put maybe a 22 on the front I could get a 10mm spacer
I really want to sacrifice as little dish as possible
#1059
Registered User
iTrader: (34)
Join Date: Jul 2006
Location: Fayetteville, NC but from 757
Posts: 5,800
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
+1K! Kinda interesting to hear this coming from someone in Houston, I thought loved the whole retarded *** looking trend of insanely low height on tall VIP rims.
#1060
Registered User
![Default](https://my350z.com/forum/images/icons/icon1.gif)
At those specs, you should be ok with a spacer. Those are a bit lower than factory but not really all that aggressive. You could get away with a spacer.