Work Wheels Thread
#1224
Registered User
Join Date: Sep 2013
Location: Loveland, Co
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
OKokok, I know I've been asking a lot of questions about Enkie RPF1's, but ....Work has now caught my eye. Particularly Work Emotion CR Kiwami's Car is a 06' Base, stock..everything (fer now), it is DD'd and used for canyon runs, will continue to be, but also will be AutoX'd. It will at some point get coil overs, and it will at some point get bigger brakes (so brake fitment, is important). I was thinking either 18x9.5's all around, or 9.5's in front, 10.5's in back. Question is, offsets? What will fit under a stock car (and future coil overs) while also fitting over future big brakes? 9.5 could be +12 +20 +30 or +38, and 10.5's only seem to come in + 23. As far as tires, I'm thinking they will be Michelin Pilot SS's, 275/35/18 on 9.5's or maybe 275/40?? 295/35/18 on 10.5's if staggering ? Opinions, thoughts, ideas please
Almighty Mod's feel free to place this as a reply to a forum if there is one it would fit under, if need be.
![Smilie](https://my350z.com/forum/images/smilies/smile.gif)
Almighty Mod's feel free to place this as a reply to a forum if there is one it would fit under, if need be.
#1226
![Default](https://my350z.com/forum/images/icons/icon1.gif)
18x10.5 comes in +15 as well:
http://www.workwheelsusa.com/media/w...LT_2013_v1.pdf
I've never heard of an Emotion CR not clearing BBKs so I think you're ok there. If you don't want to roll your fenders, I suggest 10.5+23 in the rear. I don't think you will want to run their Ultra Deep Concave in the front if you plan on getting a BBK so if you want staggered wheels and tires on the wider side, without rubbing, I suggest 9.5+20. 265/35 and 285/35 will keep your VDC happy. Or, if you don't plan on lowering your car anytime soon, 255/40 and 275/40 will fill the tire to fender gap batter.
http://www.workwheelsusa.com/media/w...LT_2013_v1.pdf
I've never heard of an Emotion CR not clearing BBKs so I think you're ok there. If you don't want to roll your fenders, I suggest 10.5+23 in the rear. I don't think you will want to run their Ultra Deep Concave in the front if you plan on getting a BBK so if you want staggered wheels and tires on the wider side, without rubbing, I suggest 9.5+20. 265/35 and 285/35 will keep your VDC happy. Or, if you don't plan on lowering your car anytime soon, 255/40 and 275/40 will fill the tire to fender gap batter.
#1227
Registered User
Join Date: Sep 2013
Location: Loveland, Co
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
18x10.5 comes in +15 as well:
http://www.workwheelsusa.com/media/w...LT_2013_v1.pdf
I've never heard of an Emotion CR not clearing BBKs so I think you're ok there. If you don't want to roll your fenders, I suggest 10.5+23 in the rear. I don't think you will want to run their Ultra Deep Concave in the front if you plan on getting a BBK so if you want staggered wheels and tires on the wider side, without rubbing, I suggest 9.5+20. 265/35 and 285/35 will keep your VDC happy. Or, if you don't plan on lowering your car anytime soon, 255/40 and 275/40 will fill the tire to fender gap batter.
http://www.workwheelsusa.com/media/w...LT_2013_v1.pdf
I've never heard of an Emotion CR not clearing BBKs so I think you're ok there. If you don't want to roll your fenders, I suggest 10.5+23 in the rear. I don't think you will want to run their Ultra Deep Concave in the front if you plan on getting a BBK so if you want staggered wheels and tires on the wider side, without rubbing, I suggest 9.5+20. 265/35 and 285/35 will keep your VDC happy. Or, if you don't plan on lowering your car anytime soon, 255/40 and 275/40 will fill the tire to fender gap batter.
![Wink](https://my350z.com/forum/images/smilies/wink.gif)
Last edited by itchy213; 04-21-2014 at 03:39 PM.
#1228
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Yes, why not. Look at this picture
(and others of the same photoset), blue Z has 9.5 +20 all around, yeah there are not CR Kiwami they are Rota Tourque but now you can imagine how it will look.
Last edited by SerG35ei; 04-22-2014 at 12:02 PM.
#1229
Registered User
Join Date: Sep 2013
Location: Loveland, Co
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Yes, why not. Look at this picture IMG_7273 | Flickr - Photo Sharing!@@AMEREPLACE@@ (and others of the same photoset), blue Z has 9.5 +20 all around, yeah there are not CR Kiwami they are Rota Tourque but now you can imagine how it will look.
#1231
Registered User
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Looks great!! Here's the pic you requested
![thumbup](https://my350z.com/forum/images/smilies/biggthumpup.gif)
18x9.5 +20 going with 275/35/1
18x10.5 +22 going with 295/35/18
![Name: IMG_5575_zpsc7a824f0.jpg
Views: 1383
Size: 116.9 KB](https://my350z.com/forum/attachments/wheels-and-tires/406384d1501528199-work-wheels-thread-img_5575_zpsc7a824f0.jpg)
![Name: IMG_5576_zps2868d34b.jpg
Views: 1421
Size: 68.9 KB](https://my350z.com/forum/attachments/wheels-and-tires/406385d1501528199-work-wheels-thread-img_5576_zps2868d34b.jpg)
Tires are ordered and on their way!
Last edited by RacingBlack350Z; 04-25-2014 at 07:21 AM.
#1236
#1240
Registered User
![Default](https://my350z.com/forum/images/icons/icon1.gif)
![Name: IMG_3146_zps7ed60d78.jpg
Views: 1460
Size: 82.8 KB](https://my350z.com/forum/attachments/wheels-and-tires/406286d1501528199-work-wheels-thread-img_3146_zps7ed60d78.jpg)
![Name: IMG_3145_zps917f2a95.jpg
Views: 1382
Size: 79.0 KB](https://my350z.com/forum/attachments/wheels-and-tires/406287d1501528199-work-wheels-thread-img_3145_zps917f2a95.jpg)
![Name: IMG_3144_zps21b2eb23.jpg
Views: 2161
Size: 87.3 KB](https://my350z.com/forum/attachments/wheels-and-tires/406288d1501528199-work-wheels-thread-img_3144_zps21b2eb23.jpg)