Yeah i know i would need a roll and a pull. I will go as low as possible, and i dont wanna run that much camber, i was thinking like -5

 

Not much just ordering an oem v3 front bumper. Post pics of the wheels once you get them on.

 

Are these 18's or 19's?? I may have just missed that info, but I'm curious cuz it looks like you have Akebono's and I've been trying to find out if an 18" step lip wheel will work with my Akebono's too.

 

hey guys, sick cars! I have a staggered set of work emotion cr kais on my Z32 that im planning to swap over to my Z33 when i get it. are theyre 18s and they are staggered, not sure about the size but i run 245's up front and 275s in back. are 18s big enough for the Z33? those wheel wells look huge

 

Yes the z33 fits 18" wheels that's the factory wheel size.

 

I was gonna wait until the snow cleared, but whatevs. Gave up my super dished and super wide Rays Volks and downsized to only 10 and a half inches wide. Same diameter tho. 18x10.5 XD9's.



Bout to hit up ebay and grab me a "Work" license plate frame.

 

Did you have them cut and welded/widened?

Otherwise, I don't think XD9's come in 18x10.5. . .

 

10? It's stretching a 255. But, could be 10. ¯\_(ツ)_/¯ I really didn't care. i was just happy to get something different on there. It is 18 tho. That much I'm sure of...maybe.

Musta been thinking D9R.

 

heres finished product....

 

Finding a shop at the moment to split my rims as they were tig welded from the production line.

Flipping the faces, and BOOM, more dish.

And polishing and repairing lips =[

 

Love work wheels..

 

I'm looking to purchase Work D9R emotion wheels as I've heard some great things about them being lightweight, aggressive and maintaining aesthetics. They come available with these dimensions:

9.5 + 12 Front offset

10.5 + 15 rear offset


I just want to know if anyone has wheels of similar size on their Z. I really want to avoid the need for a camber kit on either side. However fender rolling is not a problem.


OR I COULD GO WITH

9.5+23 front and 10.5+ 23 rear offset

However, I'd much rather go with the more aggressive option.

Please share your experience and expertise, this is my first time buying wheels this aggressive and I want to make sure it goes right

I don't have tires yet, so I'll be leaning towards whichever tire size would be most appropriate for fitment.
Im thinking tire size will probably be:
F: 245/35
R: 275/35

Edit: my Z is a 2003 WITHOUT brembos, I am lowered on Tein springs.

 

Are you lowered on any coils or springs?

 

Yeah im lowered on Tein springs

 

You could be slammed on MDU's and you won't need to roll fenders for those specs. Your tires are fairly meaty, but it shouldn't cause you any issue.

 

Hello bought some sick Gnosis gs5 wheels and i have no clue what tires i should fit. I have searched but with no good result.

I am going to roll the fender and fix some camber arms.

I want the Tires to fit right inside the fender lip. With not too aggresive Camber.

I have Ksport airbags on the car.

The wheels are 19x9.5 +- 0 ET and 19x10.5 +- 0 ET.

Would be very thankfull If you have some tips or pics with this exact setup.

Thinking about 235/35-19 front and 245/35-19 rear.

 

I would do 225/4-19 and 245/40-19 rear ,gives you the proper height tire. Then just set the camber to the curve of the stretch.

 

Im a ricer.

Work Equips
18x11-7
18x12-19


IBA_3716 by S0FA KiNG, on Flickr

 

Allrright, thank you.

Any rekommendation of tire brand?

 

My second set of Work Wheels. Work Schwert SC2 19x11.5 front and rear.