::NISMO Wheels Thread::
i like the setup, i've run them for 3 sets of tires. i am looking at some new wheels though, mainly due to the fact that i have to run spacers on these(5mm front, 10mm rear) and given the abuse it takes i just don't feel 100% safe(i'm pretty **** about mechanical safety). the next setup will be a 9.5/10.5 285/295 setup, or 17's.
i don't do auto-x really, and nothing wheel to wheel. just track days and hpde's
i like the setup, i've run them for 3 sets of tires. i am looking at some new wheels though, mainly due to the fact that i have to run spacers on these(5mm front, 10mm rear) and given the abuse it takes i just don't feel 100% safe(i'm pretty **** about mechanical safety). the next setup will be a 9.5/10.5 285/295 setup, or 17's.
i like the setup, i've run them for 3 sets of tires. i am looking at some new wheels though, mainly due to the fact that i have to run spacers on these(5mm front, 10mm rear) and given the abuse it takes i just don't feel 100% safe(i'm pretty **** about mechanical safety). the next setup will be a 9.5/10.5 285/295 setup, or 17's.
I was thinking about a 9.5 / 10.5 or a square setup depending. I wish I could find some wide 17"s with decent offsets to help save on tires.
Good info. That is the same way I feel. I left the spacers on my last HPDE event because without them my wheels are so close to my BBK it makes me nervous.
I was thinking about a 9.5 / 10.5 or a square setup depending. I wish I could find some wide 17"s with decent offsets to help save on tires.
I was thinking about a 9.5 / 10.5 or a square setup depending. I wish I could find some wide 17"s with decent offsets to help save on tires.
i really want some wide fenders and run a square 305, but thats going to have to wait.
my only problem with 17's is you really are limited to a 275. anything wider than that and you run into aspect ratio issues--too tall or too short. the fno1's are too wide, the rpf1's have the goofy barrel issues, there really isn't a great 17 scenario.
i really want some wide fenders and run a square 305, but thats going to have to wait.
i really want some wide fenders and run a square 305, but thats going to have to wait.
What are your camber specs?
Waizzz - I'm liking the izzle thing. I bet we could get it to catch on.
I guess you've only known my car w/ the V2 for the most part. I know I had the V1 when I met you, but it changed shortly thereafter.
I'm back and AadosX's LMGT4's are officially mine
My persistance paid off and I'll be headed to bama on Saturday to get them put on. I'll put up pics after my long drive back!
My persistance paid off and I'll be headed to bama on Saturday to get them put on. I'll put up pics after my long drive back!
i don't do auto-x really, and nothing wheel to wheel. just track days and hpde's
i like the setup, i've run them for 3 sets of tires. i am looking at some new wheels though, mainly due to the fact that i have to run spacers on these(5mm front, 10mm rear) and given the abuse it takes i just don't feel 100% safe(i'm pretty **** about mechanical safety). the next setup will be a 9.5/10.5 285/295 setup, or 17's.
i like the setup, i've run them for 3 sets of tires. i am looking at some new wheels though, mainly due to the fact that i have to run spacers on these(5mm front, 10mm rear) and given the abuse it takes i just don't feel 100% safe(i'm pretty **** about mechanical safety). the next setup will be a 9.5/10.5 285/295 setup, or 17's.






