>>>>>>>Volk Owners Only<<<<<<<<
#4025
![Default](https://my350z.com/forum/images/icons/icon1.gif)
You can kind of see how I did the flares on the last picture of post #4004; I Dremeled away the portion of the flares that was below my rolled fender so my wheels wouldn't rub on them. Then you can see the 2 front push fasteners I used on the forward portion of the unrolled fender in which I drilled into the fender lips to create those holes. I did the same thing with 2 more fasteners on the rear portion of the fender. No 3M double-sided tape needed.
![thumbup](https://my350z.com/forum/images/smilies/biggthumpup.gif)
Last edited by AdvanZ33; 08-06-2014 at 09:33 AM.
#4028
New Member
iTrader: (17)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Both *sheds tear* If I were keeping the car, I'd keep the wheels too. Doesn't get much better than TE37's for a 350z in my opinion.
We are looking to move to a different town which is a more 'urban' environment so my parking situation will be limited. I don't know if I'll even have a garage. Plus the Z just isn't really inspiring me anymore. I have not done a single modification to it in the year 2014, versus multiple mods per every previous year. I know it's a two-way street....the more I work on it, the more rewarded I will feel. But I don't seem to have the motivation to tinker with it anymore. I'm hoping I can find a buyer who will recognize the value (2006 with 55k miles on it, no known mechanical faults) and that it goes to a good home. My real separation anxiety will come from hoping that the new owner treats it with the same care I did.
But anyway, back on topic, I'll always love my LE37t's! Shout out to SuperBlack350z for the inspiration haha
We are looking to move to a different town which is a more 'urban' environment so my parking situation will be limited. I don't know if I'll even have a garage. Plus the Z just isn't really inspiring me anymore. I have not done a single modification to it in the year 2014, versus multiple mods per every previous year. I know it's a two-way street....the more I work on it, the more rewarded I will feel. But I don't seem to have the motivation to tinker with it anymore. I'm hoping I can find a buyer who will recognize the value (2006 with 55k miles on it, no known mechanical faults) and that it goes to a good home. My real separation anxiety will come from hoping that the new owner treats it with the same care I did.
But anyway, back on topic, I'll always love my LE37t's! Shout out to SuperBlack350z for the inspiration haha
#4034
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Advan - love your new varrsteons wheels ^_^ Red and silver is a winning combo! You're going to set a trend on this one... props!
Sry - All good things come to an end. Many, many inspiring cars have come and gone here. Eventually your new project will succumb the same fate as your Z... good luck.
Sry - All good things come to an end. Many, many inspiring cars have come and gone here. Eventually your new project will succumb the same fate as your Z... good luck.
#4035
New Member
iTrader: (5)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
They make center cap adapters but they are over $200 (Not including center caps) so they are on the back burner for now.
You can kind of see how I did the flares on the last picture of post #4004; I Dremeled away the portion of the flares that was below my rolled fender so my wheels wouldn't rub on them. Then you can see the 2 front push fasteners I used on the forward portion of the unrolled fender in which I drilled into the fender lips to create those holes. I did the same thing with 2 more fasteners on the rear portion of the fender. No 3M double-sided tape needed.
![thumbup](https://my350z.com/forum/images/smilies/biggthumpup.gif)
You can kind of see how I did the flares on the last picture of post #4004; I Dremeled away the portion of the flares that was below my rolled fender so my wheels wouldn't rub on them. Then you can see the 2 front push fasteners I used on the forward portion of the unrolled fender in which I drilled into the fender lips to create those holes. I did the same thing with 2 more fasteners on the rear portion of the fender. No 3M double-sided tape needed.
![thumbup](https://my350z.com/forum/images/smilies/biggthumpup.gif)
just shortly after i pushed the "quick reply" button i noticed this on my own
![Big Grin](https://my350z.com/forum/images/smilies/biggrin.gif)
![Wink](https://my350z.com/forum/images/smilies/wink.gif)
#4036
Registered User
Join Date: Oct 2012
Location: Highwood, IL
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
#4040
Registered User
iTrader: (1)
Join Date: Sep 2013
Location: georgia/Maryland
Posts: 246
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Looking to buy a 19x9.5 volk gt7 barrel or rim. It can be any rim with the same barrel. if you know anywhere that sells them let me know. I got ****ed on a rim deal.