Hi Guys,

Here we go again another topics about offsets. From what I can find TE37
19x9.5 offset +12 its possible to fit in our Z.But, how but the rear wheels
19x10.5 with offset +12 is that possible? to clear the brembo breaks?
opinion from wheels expert,please?

cheers,
Jerry

 

wow you'd prob need a wide bodykit for that

 

Sharif runs that +12 offset on the front and +22 with the 10.5" in the rear. It looks amazing, no fender mod needed for the front, I just dont think you can slam it...both lips are about the same size, where as usually the front has avery small lip in the 9.5-+22 offset.

 

It will clear brembos or any other big brake kit for that matter. You will just need to not roll, not cut but pull out the rear fender to make it fit. More trouble than its worth.

Edit: This all depends on how much you plan on lowering the car. On a car at stock height you will get away with cutting or rolling the fender.

 

You can fit a 19x10.5 +12. You may have to cut your fender though.

 

Thx for the info guys

 

This offset looks awesome.....a guy around here was running this on his LE37T's.

 

Can you take a picture please..+12 on the back LOL will definetly look sick

 

Pictures on the right....I believe +12

http://www.urbanracer.com/articles/a...sp?a=2083&z=40

 

As cool as it would be to see. This car looks as it is running the same set-up as Sharif. 19x9.5 +12 front and 19x10.5 +22 rear...

 

Yup, I think youre right.

 

+1....

Awesome wheels.

 

+12 fronts fit, and create a very aggresive visual effect. +12 rears would stick out a tremendous amount ,and I would not suggest them on a 10.5 rim unless you have a widebody kit.


The pics above are +12 front and +22 rear....I love the look.

 

Sharif I hope you don't mind me borrowing your pictures to illustrate my point.

 

It wouldnt stick out that much, Rick@Status ran a 19x10.5 +22 with a 15mm spacer which essentially makes it a +7. It sticks out a little bit but it looks good.

 

yup.. if you want to wait 2 months you will see a set of TE37 9.5/10.5 +12 all around..

 

Well, mine stick out a hair with 305 rears as it is now. I imagine with a smaller tire, a +12 would work, but its still going to poke out some.

Hell, I really want to run a 315, but the stick-out might be a bit too much.

 

Right now i have the CUSCO A ARM with -2.5 front -1.5 rear.19x9.5 et22+19x10.5et22.I still had to run a 15mm front+rear.So now it's sitting perfect.

So i say if you guys got camber,+15 will be perfect!

 

all comes down to the tire and the camber/toe

 

I just got TE37s with (F) 19x8.5 +29 and (R) 19x9.5 +12 and it does stick out a hair with 275-30-19. I am in the process of having fenders rolled (a must) and lowering about 1.5" and I will be fine. I will take pics this weekend...