Thanks

 

Not without some body work

 

And some ghetto stretched too thin tires.

 

With fender rolling yes, it will clear. You can go with a 275 tire, it shouldnt look too stretched.

 

it will fit as long as you roll/trim your inner fender..

 

8.5 +0 is flush witout rolling (roughly, im lowered on eibachs and run 245).

So, back track that :means 4.25 past the hub is flush. Your rims will be about 4.6-4.7 from the hub which is too far without modification or running a skinny, low profile tire.

 

it will take more than a fender roll/cut to fit with the usual tire sizes (275,285, 295, etc - will require fender pulling) but yes, can be made to fit

 

got it

 

Do it Marcel,

285/35/18 all the way.

yo i have those RPF1's coming in 18x9.5 +15 and 10.5 +15 for MAD Cheap special for you if you're interseted in a beater track wheel.

We ran really low offsets on Josh's car, near 0 offset. i think it would be a great fitment with what I would consider a reasonable fender mod to make that setup work nicely with a good size tire.