SSR GT2H

tire sizes: 275/30/19fronts // 305/30/19 rear

wheel size & offsets: 19x9 +31 F 19x10.5 R +43 however added a 15mm spacer so I guess it is now a +28

suspension mods: Hks hypermax damperII coilovers

how much lowered: alittle over a inch in the front. Rear is about a inch.
camber: not sure.

rolled or not fenders: Was hammered abit for my previous wheels which was like 3mms.

 

saw that you had 1" and more for dropped effect, any camber issues, any addntl components to keep drop safe and non-problamatic with ride...

thanks..

gathering data for just spring mod. trying to stay away from added stuff. If I would need to add stuff, then justify it with coilovers..but price is 5-fold

 

I almost got me a set of those wheels. got some pics?

 

No camber issues. Everything was aligned back to spec I think, I'll have to find the printout they gave me.

 

Wheel Size: 19x9 front; 19x10.5 rear
Wheel Offset: +31 front / +43 rear
Wheel Brand: SSR GT-2
Tire Size: 245/35/19 & 285/35/19
Tire Brand: Goodyear Eagle F1 GS-D3
Suspension: OEM
Security: Gorilla Wheel lock & Gorilla Tuner locking lug nuts! 2 different key set is needed to steal these so hopefully it will deter the thieves a bit.

 

tire sizes: 245/40/18 front & 275/40/18 rear
wheel size & offsets: 18X9 front +20; 18X10 rear +18
suspension mods: Tokicko D spec spring/shock kit.
how much lowered: 1" front / Rear
camber: stock
rolled or not fenders: needs to be rolled.

 

Did you roll both front and rear fenders?

And how much clearance in your set-up between tires and camber arm, fender, etc.. if you can give just a rough estimate? Thx.

Actually, maybe never mind bc I just saw you had suspension mods...

 

The tire/wheel clears all hardware. Just need to roll the fender. Im going to get them rolled today.

 

Still...front and rears?

 

i just got the car a few weeks ago and i think there is a problem with the tire set up. the fronts are hankook 245/35/19, and the rears are generals 275/30/19. the car is an 05 touring with a manual tranny. when i am driving hard into corners one of the front wheels fells like the abs is being activated for that one wheel even though i may not be on the brakes. it happens maybe once a day under hard conditions, but it does freak me out a little.
my rear tire seems to be to small while the front is the same diameter as the stock size. i think i will be getting some new goodyears with fronts the same size and rears 275/35/19

 

tire sizes: 255/35/19 front & 285/35/19 rear
wheel size & offsets: 19x9.5 front +26 offset 19x10.5 rear +29 offset
suspension mods: KW Varient 3, Stillen Sways, Kinetix Toe & Camber Arms, SPC Toe Bolt
how much lowered: Not sure, but its to the top of the tires
camber: not sure, will find out soon
rolled or not fenders: rolled
bbk: OEM Brembos 4f/2r pots

 

tire sizes: 275/35 front & 295/35 rear
wheel size & offsets: 18x9 front +34 offset 18x10 rear +44 offset
suspension mods: RSR springs, Hotchkis sways
how much lowered: 0.6"
camber: stock
rolled or not fenders: not rolled
bbk: OEM Brembos