Anyone here running these wheels with a BBK??? im looking for set of these, but dont know how low i can go with offsets to clear them. I have the 6 pot front and 4 pot rear kit.
The track wheels still fit (Rays), so I imagine its possible to get a pretty lowish offset.

Any thoughts?

 

If you get a low disk wheel, you may run into clearance issue with the calipers.

 

Im running 24mm on the rear on my GT-C's with no probs and 21mm on the front, so any recommendations on high disk offsets??

 

I thought you are running AME wheels? Or are you planning to?

 

Got the Volks at the moment and am planning on some AME's

 

Have you contacted Endless? They may be able to give you some guidance.

I'm running 19x9 +17 front - flat high disk and 19x10 +14 rear - taper low disk and there seems to be plenty of clearance (but I'm running stock brakes)

 

Contact Dominic at AME. www.ame-wheels.com

 

Thanks guys.

 

Spoke with AME, they advise a 15mm all round seeing as though my calipers fit the standard track Rays wheels.

Hi face on front and low on rear.

I will need to measure up to be 100%