17" Rims in the Front and 20" in the rear
#24
New Member
iTrader: (51)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by shutupandsuckit
So before you get to typing that I'm crazy, hear me out.
In alot of concept car drawings the small tire is larger then the front.
I've seen the smaller/larger setup on street cars and I always liked it.
Someone please explain why this is a bad setup?
I am no tire and wheel expert.
17" by widest recommended in the front (thinking 245 or 255)
19 or 20" by widest recommended in the rear (thinking 305 or 315)
I'm willing to buy an aftermarket suspension kit and some camber hardware & fender rolling, to get this to work.
Thanks in advance.
In alot of concept car drawings the small tire is larger then the front.
I've seen the smaller/larger setup on street cars and I always liked it.
Someone please explain why this is a bad setup?
I am no tire and wheel expert.
17" by widest recommended in the front (thinking 245 or 255)
19 or 20" by widest recommended in the rear (thinking 305 or 315)
I'm willing to buy an aftermarket suspension kit and some camber hardware & fender rolling, to get this to work.
Thanks in advance.
JET
#30
Registered User
iTrader: (8)
Join Date: Jul 2005
Location: Santa Monica, CA
Posts: 470
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by shutupandsuckit
Thanks for the responses.
It might look good in a drawing, but it's not a good idea in reality.
DSPIEL the fact that you know where to get animated dancing deodorant let's us all know how much time you must have on your hands.
Next time I need some animated cursors I'll look you up bit^h.
Guys who talk sh*t on boards are the same guys who sit in the corner very quiet in person. It's safe behind that keyboard huh?
What you never asked a question genius?
2003 Enthusiast
Built Motor, Single Turbo, HKS-VPRO
13lbs low boost :17lbs high boost
Miscellaneous: 3.3 Gear, Carbon LSD, Greddy Boost Controller, Knock Amp, Plenum, 880CC Injectors, Custom 3" Exhaust and all of the obvious stuff along the way
It might look good in a drawing, but it's not a good idea in reality.
DSPIEL the fact that you know where to get animated dancing deodorant let's us all know how much time you must have on your hands.
Next time I need some animated cursors I'll look you up bit^h.
Guys who talk sh*t on boards are the same guys who sit in the corner very quiet in person. It's safe behind that keyboard huh?
What you never asked a question genius?
2003 Enthusiast
Built Motor, Single Turbo, HKS-VPRO
13lbs low boost :17lbs high boost
Miscellaneous: 3.3 Gear, Carbon LSD, Greddy Boost Controller, Knock Amp, Plenum, 880CC Injectors, Custom 3" Exhaust and all of the obvious stuff along the way
#31
New Member
iTrader: (8)
Join Date: Oct 2005
Location: Chicago, IL
Posts: 8,365
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by Wholey Smokes
If you get that upset over an emoticon, I don't know if you're going to be able to handle this board.
#32
Registered User
Thread Starter
Join Date: Sep 2006
Location: Dallas, TX
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Ok, so after learning my lesson about what flaming is I stand corrected.
Sorry for the harsh comeback, I read into your post and thought you were just being a di$k.
Here is a link to one of the concept drawings before the Z was manufactured.
This drawing and many others like it show the 350 with a much smaller front rim then the back and I like the look of it.
Many concept specs of the 350z had 17 on the front and 20 in the rear.
http://www.courtesyparts.com/Merchan...oncept_big.jpg
Sorry for the harsh comeback, I read into your post and thought you were just being a di$k.
Here is a link to one of the concept drawings before the Z was manufactured.
This drawing and many others like it show the 350 with a much smaller front rim then the back and I like the look of it.
Many concept specs of the 350z had 17 on the front and 20 in the rear.
http://www.courtesyparts.com/Merchan...oncept_big.jpg
#33
Guest
Posts: n/a
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Originally Posted by shutupandsuckit
Ok, so after learning my lesson about what flaming is I stand corrected.
Sorry for the harsh comeback, I read into your post and thought you were just being a di$k.
Here is a link to one of the concept drawings before the Z was manufactured.
This drawing and many others like it show the 350 with a much smaller front rim then the back and I like the look of it.
Many concept specs of the 350z had 17 on the front and 20 in the rear.
http://www.courtesyparts.com/Merchan...oncept_big.jpg
Sorry for the harsh comeback, I read into your post and thought you were just being a di$k.
Here is a link to one of the concept drawings before the Z was manufactured.
This drawing and many others like it show the 350 with a much smaller front rim then the back and I like the look of it.
Many concept specs of the 350z had 17 on the front and 20 in the rear.
http://www.courtesyparts.com/Merchan...oncept_big.jpg
Thread
Thread Starter
Forum
Replies
Last Post
Lt_Ballzacki
Brakes & Suspension
39
08-06-2021 06:19 AM
ars88
Zs & Gs For Sale
18
04-04-2016 07:52 AM