Got my new 20's have one ? and any advice
05-12-2007, 08:19 PM
#1
Registered User
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Location: jacksonville, fl
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Got my new 20's have one ? and any advice
Ok so i got my new 20's on my car and i keep thinking about this 3.00% rule on my tcs. I got 20x8.5's in the front with a +20 offset and my rears are 20x10's with a +25 off set 245/35/20 and my rears are 275/30/20 I was just wondering if this setup is going to reak havoc on mt tcs I tried to do my homework and I though i was below the 3.00% and adive will help thanx guys.
05-13-2007, 12:03 PM
#2
Registered User
Join Date: Sep 2006
Location: Puyallup Wa.
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
Have you had any problems with the slip light? I just got 245/30-20 front & 285/30-20 rear. I have no problems at all. But I was going to try and exchange the front tires for 245/35-20 because they are too thin. I'm not sure if that will mess with the VDC, cause the height will be the same 26.7 all around.
05-13-2007, 12:45 PM
#3
Registered User
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Location: jacksonville, fl
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
haven't had the slip light come on at all i guess its the extra weight only had them on for a day know but have drove over 100 miles no probles yet i think it's below the 3.0% so no probs they look great and you can deff feel the diff on traction witha bigger patch so hope so
05-13-2007, 12:49 PM
#4
Registered User
Join Date: Feb 2007
Location: Va
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
I've got the basic setup as you described. I turn off my TCS but on two occasions within the last year during hard cornering or acceleration the system came back on. No problem, just hit the button again, alls well.
05-13-2007, 12:57 PM
#5
Registered User
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Location: jacksonville, fl
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Yeah I just looked at the tire models and I think i'm ok there only diff in the front is i guess a diff by 2.4% the backs are only .6% of i guess if you add them up you get the 3% so i guess every know and then it will happen and the slip light will come on guess we'll see
Trending Topics
05-13-2007, 07:41 PM
#11
Originally Posted by Shinin350z
I am not lowered. There is about two fingers length of gap, one inch. The pictures are not very detailed.
Thread
Thread Starter
Forum
Replies
Last Post
liqalu04
Engine & Drivetrain
31
01-02-2022 12:58 PM
Colombo
Forced Induction
35
11-09-2020 10:27 AM