erickim080387

iTrader: (43)

hi i am currently running 19x8.5 +25 (front) & 19x9.5+29 (rear) on my car. if i install 20mm spacers front and rear, will it sit flush or stick out of the fenders too much or even at all? also, will i need fender rolling or cutting? thank you.

davidv

iTrader: (2)

Do you have 20 mm between the outer edge of the tire and inner edge of the fender?

erickim080387

iTrader: (43)

i cant really tell. thats why im asking.

tHisZ_bFAST

iTrader: (7)

15mm and you can go flush it.

erickim080387

iTrader: (43)

so 20 will be pushing it? the only reason im wanting 20mm is i found 2 pairs for a great deal..

Tubbs

iTrader: (1)

i have 18x9 22 offsets with 20mm spacers in the back and 15 in the front. Flush and work great. I also have 245's all around a 1 degree of camber.

redlude97

iTrader: (11)

I'm running 19x9.5+30 w/ a 285/35/19 in the rear with a 25mm spacer leaving me at 9.5 +5, and I would say they are flush

Alberto

iTrader: (14)

^^Ugghh nasty negative camber FTL

erickim080387

iTrader: (43)

lol, do z ang g have same amount of fender space? im trying to ask if it might be flush for a g but stick out of fender for a z..?

dutchboy350Z

iTrader: (5)

I have 20mm spacers on my rear wheels. My original offsets were 37mm in the rear, so now I'm at 17mm. My fenders are rolled, I'm dropped 1.2" in the back and my camber is at -1.6 degrees. No rubbing.

Tubbs

iTrader: (1)

I like neg camber. Some people here like to turn, as opposed to going straight.

redlude97

iTrader: (11)

its at -1.6, thats within OEM specs, notice the pic is angled. Heres what they actually look like

erickim080387

iTrader: (43)

NICE. ok. i have one more question. i am calling all the just tires in my area for a quote to install these because i dont have a jack other than the spare tire jack and a torque wrench. one of the places actually refused to install these, saying its dangerous because the wheels will get loose and eventually fall off..? true? i am getting H&R DRS series 20mm all around by the way.

redlude97

iTrader: (11)

they won't fall off if torqued correctly and rechecked after driving 25 miles or so, just like wheels.

ssgohan434

iTrader: (13)

you'll be fine, unless you get some cheap ebay ones, but H&R are quality goods.

erickim080387

iTrader: (43)

yeah the only reason im taking these to just tires for installation is the torque wrench...

dutchboy350Z

iTrader: (5)

Or you can buy a torque wrench ($35) a floor jack and pair of jack stands ($30) and install it yourself.

erickim080387

iTrader: (43)

do you guys know what i have to torque it to? cuz just tires are actually charging a lot. i thought itd be like $10, most places want around 30, with that, ill buy my own. tq different on spacers and lugs for wheels? or are they all same? are they like 70?

dutchboy350Z

iTrader: (5)

I torqued my project kics to 85 lbs. 70 is definitely way too low. I torque my wheel nuts to 90 lbs.

erickim080387

iTrader: (43)

so, 85 for spacers and 90 for lugs? cool. i have rays lugs if its any different.. cuz it makes a squeaking noise whenever i loosen the rays lugs. thanks for the ultra fast response by the way. by the way, ill post some pics next monday or so, taking pics on sunday at a local meet. thakns for all your help guys!