Can someone please confirm if there's any clearance issue with this combo?

PLease let me know ASAP.

Thanks a lot

 

What size and offset are you looking to get?

 

Size is either 18x9.5 +15 All around or 18x10.5 All around

thx.

 

Which exact AP kit are you looking to get?

 

I've already had the AP 6/4 setup (14"/13").

I know the front barely clear my OEM 18s and the rears are uber thick. That's why I'm worried about the RPF1 (thinking of getting them for track wheels)

 

You should have no problem fitting that kit behind those wheels. There aren't many 18" RF1s out there especially on a Z. Here are pics of a Endless BBK behind a set of 19s...

http://www.jtuned.com/content/templa...d=410&zoneid=1

 

yea, but I'm hoping the front would clear. 19" won't be a problem, but the front 18" may not fit over the brakes. I know my OEM only has about 2mm of clearance at most (diameter wise)

 

Which OEM wheels do you have?

 

18", sorry for not clarifying

 

Truthfully I can't tell you without a shodow of a doubt that they will fit because I have never tried it. I think it will fit but it will be very very close just how they fit on your stock wheels.

 

Do you have the RPF1 at your shop? I can forward the link to the template if you're willing to help me check them out

 

My Enkei RPF1 18x9.5 +15 and 18x10.5 +15 clear my 13" four wheel Stoptech kit easy. I have no idea comparing AP to Stoptech though.

 

I would def. love to help you out, but we do not stock these wheels at our shop. Sorry.

 

Thanks.

Since the AP's front Rotors are 14.25" and the calipers are huge, it's having a tough time fitting under 18" wheels. I know it didn't fit under my friend's 5Zigen 18"

And to make it worse, the Rear's Calipers are ridiculously thick. My friend's wheels cleared his 4 pistons Stoptech with ease, while needed 5mm to clear the AP.

But thanks again guy, I'll do some more readings.

 

Hate to bump an OLD *** thread but did you ever confirm the RPF1 18x9.5 +15 fitting over your brakes? I'm looking to run the same size & offset over my StopTech ST-40 14" rotor.

 

^I would like to know as well.

Wonder if any 18" wheels clear the stop-tech 355mm all around kit?



Let me go search........oh wait search blows!

 

if you get them in the +15 offset, you will have no problem. If the kit is made for 18 and up, then yeah no problem again.

 

Thanks.