How To Maintain Your RAYS Wheels!
#61
Registered User
iTrader: (1)
Join Date: Nov 2005
Location: Encinitas, CA
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
Okay so I have two questions:
Is the clearcoat applied to the barrel the same as the clearcoat applied to paint?
-if so-
Could scratches or curb rash be removed from a barrel at a repair shop and then re-clearcoated so an individual would not have to constantly polish them?
Is the clearcoat applied to the barrel the same as the clearcoat applied to paint?
-if so-
Could scratches or curb rash be removed from a barrel at a repair shop and then re-clearcoated so an individual would not have to constantly polish them?
#62
8 to 11
iTrader: (7)
Originally Posted by Zrolimit
Okay so I have two questions:
Is the clearcoat applied to the barrel the same as the clearcoat applied to paint?
-if so-
Could scratches or curb rash be removed from a barrel at a repair shop and then re-clearcoated so an individual would not have to constantly polish them?
Is the clearcoat applied to the barrel the same as the clearcoat applied to paint?
-if so-
Could scratches or curb rash be removed from a barrel at a repair shop and then re-clearcoated so an individual would not have to constantly polish them?
#63
Registered User
iTrader: (1)
Join Date: Nov 2005
Location: Encinitas, CA
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jumpin800agl
the clear coat on the barrel is an ANODIZED clear coat which is different than the clearcoat on your paint. I found this out the hard way if you read further down the thread. This info came direct from Mackin industries. According to Mackin any repairs like that to the wheel will void the warranty also. I just keep polishing mine. . . which sucks but hey thye look good.
#65
Registered User
iTrader: (1)
Join Date: Nov 2005
Location: Encinitas, CA
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
More pictures of the front left. Other pictures are of some damage done by a Nissan Dealership in Las Vegas during an oil change (bastards wouldn't own up to it ). Front left has some minor scratches as well that I can't seem to get rid of (and I'm scared to try).
#66
So i know this might have been answered already..but i have the 2003 performance with the semi-upgraded 18in wheels and I have noticed that theres some of that abrasive and hazyness on the front wheels..Is there anyway to reserve it now??
#67
Registered User
iTrader: (1)
Join Date: Jan 2007
Location: gfalls/blacksburg, VA
Posts: 206
Likes: 0
Received 0 Likes
on
0 Posts
i had a major leak in my garage a week ago and the dripage left a whitish-brown residue along my front quarter panel and a good amount splashed onto one of my wheels. i claybar'd the car with zaino z-18 and the residue came off relatively easily, however, i still cant figure out how to clean my wheel. Would it be safe to clay the lip of my volks?
#68
Registered User
Originally Posted by Zrolimit
There was a warranty??? Oh well I've had my GT-Vs on my car for a little over 2 years now and there are some minor scratches that I wanted taken care of. The front left has some very minor curb rash that I thought might be fixable by a wheel repair shop. Pic below:
#69
Registered User
iTrader: (1)
Join Date: Jan 2007
Location: gfalls/blacksburg, VA
Posts: 206
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Velocity350Z
I am also interested to know the price on fixing the minor curb rash. One rim shop told me that it will cost more than the wheel itself to fix a minor curb rash, so its better to replace the whole wheel. I am hoping that he is incorrect!!
#70
Registered User
iTrader: (11)
Join Date: Feb 2006
Location: Seattle/Portland
Posts: 2,754
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by zosomoso
wow! thats ridiculous, i cant believe someone would tell you that and make sure you never go back to that shop. it should only cost you about anywhere between $100 and $170. all they do is sand it down, polish, and reapply clear coat. in fact its something that you can do yourself, but then again a shop will probably do a lot better of a job.
#71
Registered User
iTrader: (1)
Join Date: Jan 2007
Location: gfalls/blacksburg, VA
Posts: 206
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by redlude97
You cannot reapply a clearcoat to a polished wheel, that is the whole problem. To get them back to their original condition requires the wheel to be taken apart and anodized, which is very expensive and hard to get done correctly
#72
New Member
iTrader: (23)
Originally Posted by Zrolimit
More pictures of the front left. Other pictures are of some damage done by a Nissan Dealership in Las Vegas during an oil change (bastards wouldn't own up to it ). Front left has some minor scratches as well that I can't seem to get rid of (and I'm scared to try).
#73
Registered User
iTrader: (11)
Join Date: Feb 2006
Location: Seattle/Portland
Posts: 2,754
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by tnk210
I had curbed one of my GT-V's about a year ago. I took it too a local shop and they polished it right out, no damaged to the clear coat at all.