Aggressive Wheels and Stretched Tires....Welcome
Registered User
iTrader: (16)
Join Date: May 2009
Location: Cambridge, Ontario, Canada
Posts: 894
Likes: 0
Received 0 Likes
on
0 Posts
Registered User
How often are you guys that are running -3/-4 camber in the rear having to change/buy new tires? Just out of curiosity. Also, for those of you that are tucking tire in the front - can you still turn the wheel at full lock? I've always wondered if that's possible or not.
Registered User
iTrader: (4)
Join Date: Oct 2009
Location: Arlington,Texas
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
How often are you guys that are running -3/-4 camber in the rear having to change/buy new tires? Just out of curiosity. Also, for those of you that are tucking tire in the front - can you still turn the wheel at full lock? I've always wondered if that's possible or not.
as long as your toe is in spec you shouldnt have to change tires that often. and when the front tires tucked it can still turn all the way. when you turn one side raises higher and clear. might rub a little bit but thats about it. ive ran x11 in the fronts and can still turn all the way. hope that helps.
Registered User
iTrader: (4)
Join Date: Oct 2009
Location: Arlington,Texas
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
with those specs youll just need a roll in the front and and rears will just need a roll and maybe slight pull depending on tire size. as for camber my last set up was 19x10/12 -5 i only ran 2 degrees camber in the rears. fronts were whatever camber it is from the drop.
Registered User
iTrader: (4)
Join Date: Dec 2008
Location: Nashville, TN
Posts: 461
Likes: 0
Received 0 Likes
on
0 Posts
^ i had a 245/35 on a 11 -7 n the rear and i had -4.5 degress of camber with a slight pull.
So if u dont want to pull, maybe a 235 but thats a pretty good stretch.
So if u dont want to pull, maybe a 235 but thats a pretty good stretch.
Registered User
Join Date: Nov 2009
Location: ie & oc
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
how much of A difference do you think a -2 to a -7 is ? should i just do -2 and see how i like that and if i wanna go a little more just add spacers?
New Member
iTrader: (34)
Registered User
iTrader: (16)
Join Date: May 2009
Location: Cambridge, Ontario, Canada
Posts: 894
Likes: 0
Received 0 Likes
on
0 Posts