Notices
Wheels & Tires 350Z Rollers and Rubbers

Aggressive Wheels and Stretched Tires....Welcome

Thread Tools
 
Search this Thread
 
Old 12-12-2012 | 08:02 PM
  #21341  
4DGS's Avatar
4DGS
Registered User
iTrader: (16)
 
Joined: May 2009
Posts: 894
Likes: 0
From: Cambridge, Ontario, Canada
Default

^ Bad advice IMO.
Old 12-12-2012 | 08:11 PM
  #21342  
KingBaby's Avatar
KingBaby
Hardest Setting
Premier Member
iTrader: (3)
 
Joined: Feb 2008
Posts: 13,406
Likes: 130
From: MexiCali dodging potholes
Default

Agreed would be riding on blown coils in no time...
Old 12-12-2012 | 10:06 PM
  #21343  
shaddy-z.'s Avatar
shaddy-z.
Registered User
 
Joined: Sep 2009
Posts: 325
Likes: 0
From: Keller, Texas
Default

Lets not make this a question thread, there's a lot of threads on the forum about MDU coilovers. However I'll put my 2 cents... I rode on MDU's for about 7k miles (almost a year for my driving) and they were my first set of coilovers. They were honestly not that bad and allowed me to lay frame if I wanted to. Ride quality was decent, and rode pretty smooth but noticeably stiffer than stock.

Since then I have ridden on and owned some of these: BC OEM style, Stance GR OEM style, JIC Magic, and I now own Megan track coilovers. Why the Megan tracks? They're a great budget coilover and they come in a true setup which allows me to run a toe arm for setting my camber at -1 or -0 for the track at my ride height. I've had good luck with them. Coilovers are getting a bit cheaper though, look on craigslist. I've seen some BC's and Stance for 700 which is pretty good IMO.
Honestly it all comes down to what you're planning with your car. Racelands however... Belong on cheaper cars. MDU's and Racelands feel noticeably different when compared to a quality coilover. Just that "lighter cheaper" feel.
Old 12-13-2012 | 03:12 AM
  #21344  
potato's Avatar
potato
New Member
iTrader: (4)
 
Joined: Jul 2010
Posts: 771
Likes: 0
From: Houston
Default

Originally Posted by katyboi
a few of my guys are, i unfortunately have work and finals this next week (FML). plus my car is in no condition to show right now. I still havent fixed my dent from Wekfest atx, need to repaint my SSR faces or i might get them polished. Car will be going to the body shop in January.

i might even change the color or just add purple flakes or pearl to my san marino blue. Who knows?

Is WhatTheFitment Crew going?
Yea 3 of us are
Old 12-13-2012 | 03:14 AM
  #21345  
potato's Avatar
potato
New Member
iTrader: (4)
 
Joined: Jul 2010
Posts: 771
Likes: 0
From: Houston
Default

Aggressive Wheels and Stretched Tires....Welcome-1wece.jpg

Last edited by potato; 12-13-2012 at 03:44 AM.
Old 12-13-2012 | 04:16 AM
  #21346  
MANSU_V36's Avatar
MANSU_V36
Registered User
 
Joined: Jul 2010
Posts: 7
Likes: 0
From: hawaii
Default

GTR wheels with 1 inch spacers all around
Name:  8AACC104-9FE9-4C6A-8EAD-A52514706276-3141-000001B778A58CFC-1.jpg
Views: 157
Size:  79.9 KB
Name:  C46EC551-9B2E-4B2B-902F-07B055EB7557-3141-000001B787FEC858-1.jpg
Views: 184
Size:  32.4 KB

my current setup
VIP Modular VX110. in a month or so ill be reliping my wheels. got these pictures from my instagram, feel free to follow haha
20x9 fronts +0 -2.? camber
20x11 -8 rears -2.4 camber

Name:  Screenshot_2012-12-12-20-02-14-1.jpg
Views: 186
Size:  34.9 KB
Name:  Screenshot_2012-12-12-20-01-44-1.jpg
Views: 162
Size:  34.6 KB
btw do u guys think, can i fit a 13.5 in the rear with more camber, maybe say -5 and more fender pull, my fenders are already an inch pulled. i dont know how much more i can pull though? if 13.5 is to much work ill just go 12.5

Last edited by MANSU_V36; 12-13-2012 at 04:19 AM.
Old 12-13-2012 | 04:23 AM
  #21347  
MANSU_V36's Avatar
MANSU_V36
Registered User
 
Joined: Jul 2010
Posts: 7
Likes: 0
From: hawaii
Default


Last edited by MANSU_V36; 12-13-2012 at 04:24 AM.
Old 12-13-2012 | 04:28 AM
  #21348  
potato's Avatar
potato
New Member
iTrader: (4)
 
Joined: Jul 2010
Posts: 771
Likes: 0
From: Houston
Default

correct me if im wrong but i think with a 13.5 you would have clearance issues with the coil unless its a low offset. imo thats going to be way to much poke for a pull, youre going to need the fenders extended with metal work.
Old 12-13-2012 | 07:41 AM
  #21349  
DCJodon's Avatar
DCJodon
Registered User
 
Joined: Jun 2012
Posts: 388
Likes: 0
From: West Chester, PA
Default

Originally Posted by shaddy-z.
Lets not make this a question thread, there's a lot of threads on the forum about MDU coilovers. However I'll put my 2 cents... I rode on MDU's for about 7k miles (almost a year for my driving) and they were my first set of coilovers. They were honestly not that bad and allowed me to lay frame if I wanted to. Ride quality was decent, and rode pretty smooth but noticeably stiffer than stock.

Since then I have ridden on and owned some of these: BC OEM style, Stance GR OEM style, JIC Magic, and I now own Megan track coilovers. Why the Megan tracks? They're a great budget coilover and they come in a true setup which allows me to run a toe arm for setting my camber at -1 or -0 for the track at my ride height. I've had good luck with them. Coilovers are getting a bit cheaper though, look on craigslist. I've seen some BC's and Stance for 700 which is pretty good IMO.
Honestly it all comes down to what you're planning with your car. Racelands however... Belong on cheaper cars. MDU's and Racelands feel noticeably different when compared to a quality coilover. Just that "lighter cheaper" feel.
I've been on my MDUs for 10k, and they're riding just fine for me. The main reason I bought them is so I can eventually go bag-over-coil with them.
Old 12-13-2012 | 07:52 AM
  #21350  
NA&CH's Avatar
NA&CH
General & Tech Senior Moderator
MY350Z.COM
Premier Member
iTrader: (74)
 
Joined: Jan 2004
Posts: 7,175
Likes: 132
From: Florida
Default

Never seen the GT-R's look better!

Chris
Old 12-13-2012 | 09:29 AM
  #21351  
theianmcdougall's Avatar
theianmcdougall
Registered User
iTrader: (1)
 
Joined: Nov 2008
Posts: 1,220
Likes: 0
From: lafayette, louisiana
Default

13.5's on a sedan? hahah
Old 12-13-2012 | 12:33 PM
  #21352  
MANSU_V36's Avatar
MANSU_V36
Registered User
 
Joined: Jul 2010
Posts: 7
Likes: 0
From: hawaii
Default

Originally Posted by potato
correct me if im wrong but i think with a 13.5 you would have clearance issues with the coil unless its a low offset. imo thats going to be way to much poke for a pull, youre going to need the fenders extended with metal work.
Originally Posted by NA&CH
Never seen the GT-R's look better!

Chris
Originally Posted by theianmcdougall
13.5's on a sedan? hahah

ill be just resizing the outer lips, shouldn't have any coil issues

thanks

im laughing at myself too. ill just go with a 12.5 inch wide in the rear
Old 12-13-2012 | 07:01 PM
  #21353  
ekidd's Avatar
ekidd
Registered User
iTrader: (25)
 
Joined: Aug 2007
Posts: 842
Likes: 0
From: six six firsT
Default

Originally Posted by shaddy-z.
Lets not make this a question thread, there's a lot of threads on the forum about MDU coilovers. However I'll put my 2 cents... I rode on MDU's for about 7k miles (almost a year for my driving) and they were my first set of coilovers. They were honestly not that bad and allowed me to lay frame if I wanted to. Ride quality was decent, and rode pretty smooth but noticeably stiffer than stock.

Since then I have ridden on and owned some of these: BC OEM style, Stance GR OEM style, JIC Magic, and I now own Megan track coilovers. Why the Megan tracks? They're a great budget coilover and they come in a true setup which allows me to run a toe arm for setting my camber at -1 or -0 for the track at my ride height. I've had good luck with them. Coilovers are getting a bit cheaper though, look on craigslist. I've seen some BC's and Stance for 700 which is pretty good IMO.
Honestly it all comes down to what you're planning with your car. Racelands however... Belong on cheaper cars. MDU's and Racelands feel noticeably different when compared to a quality coilover. Just that "lighter cheaper" feel.
Megans ftw! especially with a lifetime warranty [:
Old 12-15-2012 | 07:14 PM
  #21354  
QuintonC's Avatar
QuintonC
Registered User
iTrader: (2)
 
Joined: Mar 2012
Posts: 1,074
Likes: 105
From: Indianapolis, Indiana
Default

13s can be done! I believe Mick Harris is running 13 rears from Nessen.
Old 12-15-2012 | 07:50 PM
  #21355  
Z_enthusiast's Avatar
Z_enthusiast
Registered User
iTrader: (16)
 
Joined: May 2010
Posts: 1,611
Likes: 2
From: baton rouge
Default

Originally Posted by QuintonC
13s can be done! I believe Mick Harris is running 13 rears from Nessen.
Not on stock 1/4's though. He has a custom wide body
Old 12-15-2012 | 09:58 PM
  #21356  
DCJodon's Avatar
DCJodon
Registered User
 
Joined: Jun 2012
Posts: 388
Likes: 0
From: West Chester, PA
Default

Originally Posted by QuintonC
13s can be done! I believe Mick Harris is running 13 rears from Nessen.
Any size can be done with the right amount of work. It's just a question of whether the end result will look good or not.
Old 12-15-2012 | 10:41 PM
  #21357  
katyboi's Avatar
katyboi
Registered User
iTrader: (2)
 
Joined: Dec 2011
Posts: 258
Likes: 0
From: Houston
Default

Originally Posted by DCJodon
Any size can be done with the right amount of work. It's just a question of whether the end result will look good or not.
Go wide or go home, if its to wide, add moar camber lol
Old 12-15-2012 | 10:43 PM
  #21358  
katyboi's Avatar
katyboi
Registered User
iTrader: (2)
 
Joined: Dec 2011
Posts: 258
Likes: 0
From: Houston
Default

Originally Posted by potato
Damn Jose"s SMB Z Looks so fresh, can't wait til mine goes to the body shop next month
Old 12-16-2012 | 12:40 AM
  #21359  
-miltdoggie-'s Avatar
-miltdoggie-
Registered User
iTrader: (18)
 
Joined: Aug 2005
Posts: 974
Likes: 4
From: SoCal
Default

Damn I cannot find a picture to repost
Old 12-16-2012 | 12:50 AM
  #21360  
KingBaby's Avatar
KingBaby
Hardest Setting
Premier Member
iTrader: (3)
 
Joined: Feb 2008
Posts: 13,406
Likes: 130
From: MexiCali dodging potholes
Default

No worries


Name:  static-350z-slammed.jpg
Views: 706
Size:  84.6 KB


Quick Reply: Aggressive Wheels and Stretched Tires....Welcome



All times are GMT -8. The time now is 06:41 AM.