Aggressive Wheels and Stretched Tires....Welcome
Registered User
Join Date: Jun 2012
Location: West Chester, PA
Posts: 388
Likes: 0
Received 0 Likes
on
0 Posts
Need some help guys. I have recently lowered my Z and been to 3 places (Firestone, tire kingdom, and Nissan) trying to get an alignment. All the shops say its to low to get on the rack. Even tried the dps600 alignment machine at Nissan which is used to align the gtr and it didn't work.
I live in West Palm Beach and wouldn't mind driving a bit. Please help
I live in West Palm Beach and wouldn't mind driving a bit. Please help
New Member
iTrader: (25)
Registered User
iTrader: (2)
Join Date: Jun 2010
Location: Ladera Ranch
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
New Member
iTrader: (4)
Join Date: Jul 2010
Location: Houston
Posts: 771
Likes: 0
Received 0 Likes
on
0 Posts
Need some help guys. I have recently lowered my Z and been to 3 places (Firestone, tire kingdom, and Nissan) trying to get an alignment. All the shops say its to low to get on the rack. Even tried the dps600 alignment machine at Nissan which is used to align the gtr and it didn't work.
I live in West Palm Beach and wouldn't mind driving a bit. Please help
I live in West Palm Beach and wouldn't mind driving a bit. Please help
Registered User
iTrader: (9)
New Member
iTrader: (4)
Join Date: Jul 2010
Location: Houston
Posts: 771
Likes: 0
Received 0 Likes
on
0 Posts
blue magic from vatozone. if they are really bad hit it with a drill cone thing. my old wheels were wet sanded to remove brake dust and i was able to make them mirror shine again with some blue magic and a cone
Registered User
Join Date: Nov 2009
Location: ie & oc
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
Banned
iTrader: (25)
Sometimes. It's cheaper than detailed image but DI has free shiiping a lot of the time so I just compare.
It'll work as ong as there's no clear on top of the lip. Any polish will be like that. It's gotta clean the metal, not a clear coat.
It'll work as ong as there's no clear on top of the lip. Any polish will be like that. It's gotta clean the metal, not a clear coat.
Registered User
Join Date: Jul 2012
Location: san jose
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
hey guys, im gonna be rebarreling some abc exclusives pretty soon. im going 19x11 +5 with 245/40 tire front and 19x12.5 -16 with 275/35 or 30 tire rear.im not too worried about the front right now, im a bit worried about how the rear will fit. im currently running 19x11 all around +15fr -2rear. 245/40 fr and 255/35/ tire right now in the rear and it almost has a finger gap. fenders are all rolled flat with tiny pull in the rear. camber is -2 fr and -4 rear. i might end up just doing 19x12 -10 if its too hard to fit with 12.5. opinions please?
Last edited by 350zsteez; 02-25-2013 at 07:32 PM.
Registered User
iTrader: (4)
Join Date: Oct 2009
Location: Arlington,Texas
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
Registered User
iTrader: (4)
Join Date: Oct 2009
Location: Arlington,Texas
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
New Member
iTrader: (4)
Join Date: Jul 2010
Location: Houston
Posts: 771
Likes: 0
Received 0 Likes
on
0 Posts