Aggressive Wheels and Stretched Tires....Welcome
#3802
Registered User
iTrader: (6)
thats what she said....
it'll look way better with the plate, just you wait. The tips getting painted black also.
Its just 2.5 from the Y-pipe back with a small resi in line...im prob gonna order a ebay y pipe or something and run an inline muffler, its too friggen raspy for me. Might even re-do the whole thing 3 inches to match the aftermarket Y-pipe outlet.
It sounds unreal WOT, rev matching and decel...otherwise anything over 3k is crazy raspy, its kind of cool its got more than one tone at the same time. ill get vids sooner or later.
it'll look way better with the plate, just you wait. The tips getting painted black also.
Its just 2.5 from the Y-pipe back with a small resi in line...im prob gonna order a ebay y pipe or something and run an inline muffler, its too friggen raspy for me. Might even re-do the whole thing 3 inches to match the aftermarket Y-pipe outlet.
It sounds unreal WOT, rev matching and decel...otherwise anything over 3k is crazy raspy, its kind of cool its got more than one tone at the same time. ill get vids sooner or later.
#3808
Registered User
iTrader: (4)
Join Date: Apr 2008
Location: New Orleans
Posts: 2,157
Likes: 0
Received 0 Likes
on
0 Posts
^^^I assumed that why he did it because I personally would see no need to do it other than that but some of those pics seem as if the pipe sits just as low as my single AAM TI does
#3815
Hardest Setting
iTrader: (3)
Join Date: Feb 2008
Location: MexiCali dodging potholes
Posts: 13,406
Received 130 Likes
on
102 Posts
I would look into getting a ti tip or something else cause you gonna keep getting the WTF to how you routed your exhaust...
I'm not saying please other people but it would look insane if you had a nice tip poking out like an inch or so even a greddy/hks/Motor dyne end since it's straight and the way you angle is it can be welded right there easily
does that make sense...not good at explain things over the internet...
I'm not saying please other people but it would look insane if you had a nice tip poking out like an inch or so even a greddy/hks/Motor dyne end since it's straight and the way you angle is it can be welded right there easily
does that make sense...not good at explain things over the internet...
#3816
Registered User
Finally..
I'm pretty sure I'm lowering it a little more.. When I measured the clearance of the chassis and the y-pipe I got nervous about going to low.
I'm pretty sure I'm lowering it a little more.. When I measured the clearance of the chassis and the y-pipe I got nervous about going to low.
#3820
Registered User