theianmcdougall

iTrader: (1)

225 would be better, only reason i would go with a 215 is if you needed a serious stretch to fit it, but i doubt you will

and a 255 would probably be better for the rears as well, but thats your call

im not sure if ima do 245's or 255 when i order my 11's, 245s are more common/cheaper

importroller

iTrader: (1)

Never liked stretched tires. But love the agressive wheels

evil350zdriver

iTrader: (2)

spoolngst....that new drop and smaller tires sure made that G even better!!!!........looking real hard bro!!!!....favorite G so FAR



jacob 350......225 will be cool!...had that on a 9' before and it was a decent stretch.....and 9.5 is just a tad wider!

soclean

iTrader: (13)

225 with the offset you have

Jacob350z

iTrader: (6)

Ima go with a 225 up front.

One question. Can I fit the 19x11-17 on the rear without a camber kit?? If I pulled the fenders. Guy doesn't have the camber kit in stock and I want these on asap

let me know

soclean

iTrader: (13)

Yes you can but your gonna have to pull your fenders a good amount and dump your car so it can camber itself

oneandonly5680

iTrader: (1)

Word word.

Sweet can't wait!

Sorry about that, just had to jump on the bike comment real quick but yes back to cars......for now hahaha!!

How long did you think it would take haha??

Spoolngst, car looks killer as always pimpin!!

lixam

iTrader: (3)

your gonna have to dump the car so the stock camber arms can "allow" you to get more camber...either that or pull the fender a **** ton...

i got 18x11 -17 in the rear and i pulled moderately and running 4 degree of camber and i rarely rub at all..BUT i am lowering a lil bit more in the rear and making camber about 4.7 so it should be flush/tucked/low..

but id say moderate pull... low pro tire...4 degree of camber and low...and you should be ok.

lixam

iTrader: (3)

and i have a 245/40 on the rear..

general rule of thumb for an equal stretch all around is for every 1 inch of difference in rim you wanna go with 20 difference in tire width...FOR EXAMPLE.

10 inch up front. 225/40
11 inch in rear. 245/40

10 inch in front. 225/40
12 inch in rear. 265/40...

9 inch in front. 215/40
10 inch in back. 235/40..

this will give you even stretch/size...up to you on actualy sizing though..but its an easy formula alot of people dont know of lol

Jacob350z

iTrader: (6)

Nvm got some camber arms comming in. Had to pay a little extra .

Hope I can get these on by next weekend. Still need to order my tires

deeznutts23

iTrader: (3)

You gonna be good for the Lakefront meet Jacob?

Toby-22

iTrader: (25)

BUMP with pics

had to raise the car by almost an inch



Is that a quarter?

brandon3434

iTrader: (9)

^^^That looks perfect man! Love it! Do you rub at all? Specs?

Toby-22

iTrader: (25)

My fenders sometimes hit the lip of my wheels and my a-arms still hit the frame of the car but not nearly as bad as before.

Square setup
19x10.5 +12 front with 235/35 and -6 rear with 245/35

I may go with 265/35 front and 275/35 rear with my next setup.

brandon3434

iTrader: (9)

You think there is enough room for that? Or are you gonna add more camber? I'm looking at some 10.5 +0's, was thinking 265's...

Toby-22

iTrader: (25)

no if i put the 275 ill be at +12 or maybe +7 out back (or i may stay with where im at now). And im not too sure that 265/35 will work, if it does it'll be real tight lol.

Jacob350z

iTrader: (6)

ok decided not to get the rear arms, ill make it fit without them for now.


i had to order 2 different sets of tires sold out and back order from the place i order from lol.

2 225/35/19 Federals up front
2 245/35/19 General in rear.


haha o well ***** going to be baller!

deeznutts23

iTrader: (3)

**** is going to be ghey

SuperBlack350z

iTrader: (59)

Anybody in this thread have nismo sides and rear with aggressive fitment? Sorry, to lazy to go through all of these pics.

theianmcdougall

iTrader: (1)

i think that white z with the workmiesters did, think hes from cali