Aggressive Wheels and Stretched Tires....Welcome
New Member
iTrader: (4)
Join Date: Nov 2007
Location: dallas
Posts: 901
Likes: 0
Received 0 Likes
on
0 Posts
Yea ima see if I can switch the 245 I have for 255 but If I don't I think I'll just go for it , it won't be that much of a difference. The more stretched the better and easier it will be to fit that bad boy in.
It has 275 now but not for long, I'm also waiting for my camber kit
It has 275 now but not for long, I'm also waiting for my camber kit
New Member
iTrader: (4)
Join Date: Nov 2007
Location: dallas
Posts: 901
Likes: 0
Received 0 Likes
on
0 Posts
make sure you get 255/35 not 40 series... 245 just sounds so risky, but im sure its been done. my 2 cents, throw 255/35 and some negative camber and youre good.
Registered User
iTrader: (23)
Join Date: Oct 2009
Location: Texas
Posts: 1,122
Likes: 0
Received 0 Likes
on
0 Posts
Registered User
Join Date: May 2010
Location: Finland
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Registered User
iTrader: (4)
Join Date: Oct 2009
Location: Arlington,Texas
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
too bad i couldnt bring the Z out to CCM .. =/
they figured out the problem when i got back. heres a clip of it back up and running.
http://youtu.be/iuCSw_CyVbU
they figured out the problem when i got back. heres a clip of it back up and running.
http://youtu.be/iuCSw_CyVbU
New Member
iTrader: (4)
Join Date: Nov 2007
Location: dallas
Posts: 901
Likes: 0
Received 0 Likes
on
0 Posts
oh.. well i ran 11.5 -21 too and only had a pull too but 10.5 -49 is another -15mm .
Last edited by phiooz; 02-09-2012 at 07:14 AM.
Registered User
iTrader: (18)
Registered User
iTrader: (23)
Join Date: Oct 2009
Location: Texas
Posts: 1,122
Likes: 0
Received 0 Likes
on
0 Posts
Basically, there's like 24.7 mm per inch. So mor or less a 10.5 wide neg 49 is equal to a12.5 wide with 0 offset. Or a 11.5 wide neg 23/24
And so on. Don't let the offset intimidate you because the width comes into play more so than the offset.
Example, a 12wide 0 offset is equivalent to a 8 wide neg 98 offset... Neg 98 sound fucn crazy, but in perspective, it's a very easy fit on the rear of a z.
Hope that example helps you out.
And so on. Don't let the offset intimidate you because the width comes into play more so than the offset.
Example, a 12wide 0 offset is equivalent to a 8 wide neg 98 offset... Neg 98 sound fucn crazy, but in perspective, it's a very easy fit on the rear of a z.
Hope that example helps you out.
New Member
iTrader: (4)
Join Date: Nov 2007
Location: dallas
Posts: 901
Likes: 0
Received 0 Likes
on
0 Posts
Basically, there's like 24.7 mm per inch. So mor or less a 10.5 wide neg 49 is equal to a12.5 wide with 0 offset. Or a 11.5 wide neg 23/24
And so on. Don't let the offset intimidate you because the width comes into play more so than the offset.
Example, a 12wide 0 offset is equivalent to a 8 wide neg 98 offset... Neg 98 sound fucn crazy, but in perspective, it's a very easy fit on the rear of a z.
Hope that example helps you out.
And so on. Don't let the offset intimidate you because the width comes into play more so than the offset.
Example, a 12wide 0 offset is equivalent to a 8 wide neg 98 offset... Neg 98 sound fucn crazy, but in perspective, it's a very easy fit on the rear of a z.
Hope that example helps you out.
http://1010tires.com/WheelOffsetCalculator.asp