Hey guys,

I got an "ok" answer from a guy but he's not on this forum anymore.

My question is will a stoptech 332mm 4 piston BBK (FRONT ONLY) be able to fit under my 19x9.5 +24 Work Meister front wheeLs. If anyone got info or pics PLEASE help me out. I know the meisters are REALLY picky with brakes haha. Thanks!

Alvin

 

i have the same stoptechs and my motegi touges are +26 so i think u should be good to go! bump just in case...

 

Thanks bro, I think it should too but just wanted to verify. The reaosn being my Meisters got big lips for the front (3") and it spokes concaves too,.

 

isnt there the template you can cut out and put on the hub to see if it clears?

http://www.stoptech.com/tech_info/wheel_fitment.shtml

 

Nice Find!

 

awesome find Thanks chester!

 

what color are your new brakes?

 

They're going to be red...just like yours! I'm gonna repaint the rear brembos red too to match <---too cheap to buy rear stoptechs haha

 

Alvin, the OEM Brembos actually use a deeper mounting depth (need more spoke clearance) than the Stoptechs. If you have enough spoke clearance for Brembos then you are good to go. The only other issue would be diameter and obviously there will be no problem there since you have 19's. They clear wheels as small diameter as stock 17's in case you need to run one for a spare or something. Enjoy, post some pics when you get them completed.

 

don't forget to ***** your pics alvin once you get them installed.

 

one thing i missed most about the track brembos were the orange color...

maybe i should repaint my stoptechs back to orange?

as for the rear brembos. thats good. you can still ebrake drift w/o worrying!

 

this isgood to know. I've got meisters too but and I want to get a bbk but didn't know waht would fit.