New Wheel: Yokohama *** ADVAN RZ *** Wheels
#1
Registered User
Thread Starter
iTrader: (9)
Join Date: Dec 2003
Location: Waipahu HI; Phoenix AZ
Posts: 2,069
Likes: 0
Received 1 Like
on
1 Post
New Wheel: Yokohama *** ADVAN RZ *** Wheels
At first glance, looks similar to the RS, but a closer look reveals a pseudo "split five" design, similar to Work Emotion CR Kai. Also available in the dark color I MUST HAVE- gunmetal!
It's either these or the "split six" AME TM-02 for my new wheels. Man.. both of these are M.A.T produced.
It's either these or the "split six" AME TM-02 for my new wheels. Man.. both of these are M.A.T produced.
Last edited by ctwentytwo; 04-09-2008 at 11:20 PM.
Trending Topics
#11
Registered User
Thread Starter
iTrader: (9)
Join Date: Dec 2003
Location: Waipahu HI; Phoenix AZ
Posts: 2,069
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by NA&CH
oooo Very nice. No more twins?? I have been thinking of a change. Something Silver.
I do like those split fives. Changes the look of the car Edwin.
Chris
I do like those split fives. Changes the look of the car Edwin.
Chris
Originally Posted by Motormouth
please don't put gunmetal rims on your car
but if anything, those Advans rule. but I do like the AMEs as well.
but if anything, those Advans rule. but I do like the AMEs as well.
I think the gunmetal/white/black lip combo would look good.
Oh wait... you have the gunmetal Weds
I used to think the multi spoke rims like the RS, CE28, CR KAI did not look good. Your car, JetPilot, and a few others have changed my mind.
#12
Banned
iTrader: (44)
thanks
but yeah, I was never blown away by white cars with muted colors. maybe if that recessed area on the outer lip rim had an accent color, but white can accept such a strong wheel color it'd be a shame to put a dull color on. I struggle with the Chrome Silver... I can't run white, or gold, or bronze and have it look as good as a white, red or silverstone car.
but if you are keeping the gold RGs, then go for it, that way you can still pop when you feel the urge
but yeah, I was never blown away by white cars with muted colors. maybe if that recessed area on the outer lip rim had an accent color, but white can accept such a strong wheel color it'd be a shame to put a dull color on. I struggle with the Chrome Silver... I can't run white, or gold, or bronze and have it look as good as a white, red or silverstone car.
but if you are keeping the gold RGs, then go for it, that way you can still pop when you feel the urge
Last edited by Motormouth; 04-10-2008 at 10:03 AM.
#14
Registered User
iTrader: (13)
Join Date: May 2004
Location: Ontario, Canada
Posts: 6,002
Likes: 0
Received 0 Likes
on
0 Posts
is it being offered in the dark chrome colour like the RS's? I think that would be much better than gun metal. What kind of sizes are available (ie are there 19s?)
edit: did some googling found the size list.
Looks like all of the offsets are pretty conservative....I vote for 19x9+25 and 19x10+25.
edit: did some googling found the size list.
Looks like all of the offsets are pretty conservative....I vote for 19x9+25 and 19x10+25.
Last edited by noodleman; 04-10-2008 at 10:23 AM.
#15
Registered User
Thread Starter
iTrader: (9)
Join Date: Dec 2003
Location: Waipahu HI; Phoenix AZ
Posts: 2,069
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by noodleman
is it being offered in the dark chrome colour like the RS's? I think that would be much better than gun metal. What kind of sizes are available (ie are there 19s?)
edit: did some googling found the size list.
Looks like all of the offsets are pretty conservative....I vote for 19x9+25 and 19x10+25.
edit: did some googling found the size list.
Looks like all of the offsets are pretty conservative....I vote for 19x9+25 and 19x10+25.
The Advans I have are 18x9 +22, 18x10 +25...
... and considering volk TE's 19x10.5r +22 is "pushing" the "not rolling fender" phobia I have, as well as many others, the 18/19x10r +25 rim would be "max flush w/o roll."
BTW Noods, it's "Kics Project"... in your sig... sorry, just a pet peeve.
#18
Registered User
iTrader: (13)
Join Date: May 2004
Location: Ontario, Canada
Posts: 6,002
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ctwentytwo
Wussup Noods... yeah, the SBC color would look good, and I heard they are as durable as real chrome... just not giving a weight hit that real chrome would, but I seen this white porche with Gunmetal, and the old Greddy pics with bronze TE37s, and I thought even then, to get a dark color. Plus you don't have to wash em as much... the dark colors would hide the brake dust and dirt
The Advans I have are 18x9 +22, 18x10 +25...
... and considering volk TE's 19x10.5r +22 is "pushing" the "not rolling fender" phobia I have, as well as many others, the 18/19x10r +25 rim would be "max flush w/o roll."
BTW Noods, it's "Kics Project"... in your sig... sorry, just a pet peeve.
The Advans I have are 18x9 +22, 18x10 +25...
... and considering volk TE's 19x10.5r +22 is "pushing" the "not rolling fender" phobia I have, as well as many others, the 18/19x10r +25 rim would be "max flush w/o roll."
BTW Noods, it's "Kics Project"... in your sig... sorry, just a pet peeve.
if you do some calcs, the .5" difference means you push your rims outwards by .25", which is about 6.35mm (according to google), so
10.5 +22 = 10 +(22-6) = 10 +16 in terms of outward flushness
or the otherway
10 +25 = 10.5 +(25+6) = 10.5 +31
so if you wanted max flushness on a 10" wide rim, you'd need offset in the teens to match the TE 10.5+22 offset.
haha, i'm all about the bling, but if you like GM, go for it. I figure SBC would still match your criteria of "dark" rim, so i figured i'd throw that out there. I know the RS has a +15 offset available, not sure if the RZ will provide the same.
Last edited by noodleman; 04-10-2008 at 11:47 AM.
#19
Registered User
Thread Starter
iTrader: (9)
Join Date: Dec 2003
Location: Waipahu HI; Phoenix AZ
Posts: 2,069
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by noodleman
first of all, sig is fixed I knew it was called Kics project, but since everyone else around here said project kics, i just followed like sheep haha.
if you do some calcs, the .5" difference means you push your rims outwards by .25", which is about 6.35mm (according to google), so
10.5 +22 = 10 +(22-6) = 10 +16 in terms of outward flushness
or the otherway
10 +25 = 10.5 +(25+6) = 10.5 +31
so if you wanted max flushness on a 10" wide rim, you'd need offset in the teens to match the TE 10.5+22 offset.
haha, i'm all about the bling, but if you like GM, go for it. I figure SBC would still match your criteria of "dark" rim, so i figured i'd throw that out there. I know the RS has a +15 offset available, not sure if the RZ will provide the same.
if you do some calcs, the .5" difference means you push your rims outwards by .25", which is about 6.35mm (according to google), so
10.5 +22 = 10 +(22-6) = 10 +16 in terms of outward flushness
or the otherway
10 +25 = 10.5 +(25+6) = 10.5 +31
so if you wanted max flushness on a 10" wide rim, you'd need offset in the teens to match the TE 10.5+22 offset.
haha, i'm all about the bling, but if you like GM, go for it. I figure SBC would still match your criteria of "dark" rim, so i figured i'd throw that out there. I know the RS has a +15 offset available, not sure if the RZ will provide the same.
Wow, in a non-related note... Kipers really going at it with the new guy, McShea, on who's going no.1 on draft day. Gotta love Kiper.
#20
Registered User
Thread Starter
iTrader: (9)
Join Date: Dec 2003
Location: Waipahu HI; Phoenix AZ
Posts: 2,069
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by noodleman
first of all, sig is fixed I knew it was called Kics project, but since everyone else around here said project kics, i just followed like sheep haha.
if you do some calcs, the .5" difference means you push your rims outwards by .25", which is about 6.35mm (according to google), so
10.5 +22 = 10 +(22-6) = 10 +16 in terms of outward flushness
or the otherway
10 +25 = 10.5 +(25+6) = 10.5 +31
so if you wanted max flushness on a 10" wide rim, you'd need offset in the teens to match the TE 10.5+22 offset.
haha, i'm all about the bling, but if you like GM, go for it. I figure SBC would still match your criteria of "dark" rim, so i figured i'd throw that out there. I know the RS has a +15 offset available, not sure if the RZ will provide the same.
if you do some calcs, the .5" difference means you push your rims outwards by .25", which is about 6.35mm (according to google), so
10.5 +22 = 10 +(22-6) = 10 +16 in terms of outward flushness
or the otherway
10 +25 = 10.5 +(25+6) = 10.5 +31
so if you wanted max flushness on a 10" wide rim, you'd need offset in the teens to match the TE 10.5+22 offset.
haha, i'm all about the bling, but if you like GM, go for it. I figure SBC would still match your criteria of "dark" rim, so i figured i'd throw that out there. I know the RS has a +15 offset available, not sure if the RZ will provide the same.
or the otherway
10 +25 = 10.5 +(22+6) = 10.5 +28