New Wheel: Yokohama *** ADVAN RZ *** Wheels
#22
Originally Posted by ctwentytwo
Fixed...
or the otherway
10 +25 = 10.5 +(22+6) = 10.5 +28
or the otherway
10 +25 = 10.5 +(22+6) = 10.5 +28
http://www.1010tires.com/WheelOffsetCalculator.asp
if you punch in 10 +25 as current, and 10.5 +31, it'll say the offset is the outer position is the same.
but yea, +25 for sure you wont' be rubbing, but i think you can go 10+20 and it still won't be close to rubbing. Moot point, since Advan doesn't offer that offset. And either way, it'd look hot I still vote for SBC if it means anything haha.
Last edited by noodleman; 04-10-2008 at 02:39 PM.
#24
Thread Starter
Registered User
iTrader: (9)
Joined: Dec 2003
Posts: 2,069
Likes: 1
From: Waipahu HI; Phoenix AZ
Originally Posted by noodleman
no, cause you're making the conversion from a 10+25 offset to what it would be equalivent offset on a 10.5 in terms of outer flushness, so you use the +25 offset and add 6mm..
http://www.1010tires.com/WheelOffsetCalculator.asp
if you punch in 10 +25 as current, and 10.5 +31, it'll say the offset is the outer position is the same.
but yea, +25 for sure you wont' be rubbing, but i think you can go 10+20 and it still won't be close to rubbing. Moot point, since Advan doesn't offer that offset. And either way, it'd look hot I still vote for SBC if it means anything haha.
http://www.1010tires.com/WheelOffsetCalculator.asp
if you punch in 10 +25 as current, and 10.5 +31, it'll say the offset is the outer position is the same.
but yea, +25 for sure you wont' be rubbing, but i think you can go 10+20 and it still won't be close to rubbing. Moot point, since Advan doesn't offer that offset. And either way, it'd look hot I still vote for SBC if it means anything haha.
you had it 10.5 +25, instead of the correct 10.5 +22 starting point...
I don't think you quite see your small mistake. But I know what you're thinking, and you know what I'm thinking.
The TM02 by AME is actually offered in more agressive 9/10 +15... in hindsight, the 10mm diff from +25 would almost get you to the same place as 10.5 +22. I'll think about SBC... hmmmm...
Last edited by ctwentytwo; 04-10-2008 at 03:52 PM.
#26
Joined: Jan 2004
Posts: 7,175
Likes: 132
From: Florida
Originally Posted by ctwentytwo
I'm keeping the RGII's... you just get tired of the look. I'll swap them out every year so the grass won't be as green on the other side. Your car's looking pimp though. So many choices... RPF1's also, which is also M.A.T, but hella cheaper... and available in SBC.
Get your hands off the RPF1's Thanks meng. Really liking the Varis Parts. Any more in mind?
I would ethier do my RG's Mag blue and get a 18x10 for up front(or cheap out and get spacers) or get the RpF1s in SBC or Straight Silver. I really do like this new design...
Chris
#30
Thread Starter
Registered User
iTrader: (9)
Joined: Dec 2003
Posts: 2,069
Likes: 1
From: Waipahu HI; Phoenix AZ
Originally Posted by NA&CH
Get your hands off the RPF1's Thanks meng. Really liking the Varis Parts. Any more in mind?
I would ethier do my RG's Mag blue and get a 18x10 for up front(or cheap out and get spacers) or get the RpF1s in SBC or Straight Silver. I really do like this new design...
Chris
I would ethier do my RG's Mag blue and get a 18x10 for up front(or cheap out and get spacers) or get the RpF1s in SBC or Straight Silver. I really do like this new design...
Chris
#31
Originally Posted by PurelySwift
OMG This is the best new wheel announcement since the RGII 4 years ago. Thank you God!
C22, you know what to do. Follow your heart
C22, you know what to do. Follow your heart
Which reminds me...has anybody weighed these?
Thread
Thread Starter
Forum
Replies
Last Post