android123

need help form you guys....
if i put 19" x 10.5" for the rear, i need to roll my fender, i know that

what if i put 19" x 9.5" at the back, and lower the car also, do i need to roll the fender too?

is it a big difference in appearance between 9.5" and 10.5"??

thanks!!

john350Z

depends on offset.

9.5 rear with a 22mm should be ok with drop

now a 9.5 rear with a 12mm offset with a drop you need to roll fenders.

-john350z

failsafe

9.5" Rear with 22mm offset does not require fender roll. That's what I'm running.

KarmaMag

There's nothing to worry about on rolling fender. I have mine rolled and it still looks almost like stock.

Failsaf3 and I will be meeting tomorrow night in Santa Clara. If you want to see the difference between 9.5 et 22 and 10.5 et 22, pass by tomorrow night at SpeedRing in Santa Clara.

fairladyZ in Japan

I am running TE37 with 9.5 and 22 offset on the rear.

I also have the S-tune which dropped it about 3/4 of an inch. I would not want to go more than that, personally.

Absolutely no problems... except for some negative camber in the rear.

joust75

iTrader: (1)

Hey John Wassup!!!


Will a 22mm offset yield a nice big llip like on your TE-37s?

I noticed Fairlady Z in Japan has a 22 offset in rear and I dont think he has any lip.

tmt

I am running a Buddy club P1 racing II 19 x 10 offset 25 on the rear . it seen ok !

android123

thanks guys, appreciated for all input