They still have plenty in stock (both sizes). $250 each (includes center caps, metal valve stems and correct lug nuts!). You can't go wrong with spending only a grand for a full set of Ray's Engineering wheels!!!

 

through out the thread people ran 15 and 20mm spacers, i found a set locally but they're 25mm. has anyone ran those sized yet on stock suspension?

 

Gunslinger - This is my where'd you get that reply.

Love the look. Where did you get your wheels from for $800 shipped? I'm in the market for new tires and theres a set of 370 wheels plus tires for 1500. I'm tempted but im not just sure on the look of the 370s. I've seen the Nismo 370s on my Nismo 350 and I love those.

Like the license plate frame. I have one similar but the paint is fading. Where'd you get that?

 

I'm running 25mm spacers. They fit fine. I'm going to swap out with a set of 20mm spacers next time I have the wheels off. I think the 20mm set will look better.

 

350ZNISMO673 there was a sale on these forums for a few months for $800 shipped on those

atenzany62 Get 20mm! Try to trade your 25mm on craigslist for a set of 20mm

 

I'm gonna sell mine in a couple of weeks with lug nuts and spacers included. I'll make a for sale ad in the Texas Marketplace. Houston pick-up only. Picture in post #178.

End thread jack.

 

bump for more pics

 

Bumb if any body is selling these PM me!!!

 

I got these wheels on today with some hub centric eibaich 15mm spacers and there is a slight gap where the factory studs are hitting the back of the wheel.. Anyone else with this issue and is it safe to run with a 1/4 space between the wheel and the spacer? The wheel tightens down and looks snug but wanna make sure it's safe..

 

I don't think I would drive the car with that gap between the wheel and the spacer. You should probably get a 25 mm spacer since that is also the length of the stock lugs on the Z.

 

thanks. yea thats what im doing. the back is a little sunk in too. i might get a 5 or 10mm spacer for the rear

 

 

Does anyone have these on a 350 yet? Or does someone want to do a quick photoshop? I feel like the curvy split-spoke part might compliment the 350:

 

I think the the ones in my pic right above look better(pre 2013) just my opinion tho

 

They do look good, just curious how the new style would look

 

I had my 370 wheels on my 350 for a little while I was waiting.....They look like stock wheels.... Opinions and likes are subjective depending on the person being asked. Do what you like. My opinion is, why waist the time or money to find other stock wheels? Do yourself a favor and save for something thats going to give your car some personality if your going to bother with wheels.

-Cheers.

 

opposite for me, wanted to keep my Z looking stock and the z34 wheels keep it in the family, thats giving it personality and class...
Also they where an upgrade in size+width compared to z33 stock wheels

 

Matter of opinion I guess. Just think the time and money is a silly waste. If your so dead set on "keeping it in the family" then it sounds like your dead set on your decisions here. Which also makes this thread completely pointless. Get the wheels, Other have done it.

 

anyone know if u can run a bolt on 10mm spacer with built in studs in the rear with these wheels? when i tried to run 15mm up front it was hitting the wheel and i had to go larger. i wanna make the back wheels flush... would 10mm be too much?

 

5mm or 10?

i tried a 15mm bolt on spacer on the rear and it was mexiflush lol