370Z Rays on 350Z?
#302
New Member
Obviously it was not to push them in
#303
350Z/370Z Tech Moderator
MY350Z.COM
MY350Z.COM
I changed the 18" original wheels for the 19" nismo wheels.
The thing is that the rear wheels are not flush with the body and they looks too much out
Of the body, it is about 3/4" inches outside. I think it is due to the offset.
Is there a way to cut out anything in order to get the wheel a little more inside the body?
The thing is that the rear wheels are not flush with the body and they looks too much out
Of the body, it is about 3/4" inches outside. I think it is due to the offset.
Is there a way to cut out anything in order to get the wheel a little more inside the body?
OEM Z34N wheels (9.5/10.5) fit fine on Z33 with spacers to bring offset to "normal" as do the 19" "aftermarket" Nismo S-Tune (LMZ5) 19's (9/10s).
Are the wheels sticking out at the top of the wheel or the lower-rear (side closest to rear of car)? Lower rear poke would be normal as there's 2.0-2.5" extra width on the Nismos over stock set up....
Just sayin' here.... are you sure the car didn't have spacers on it when you installed the Nismos? If anything, the high offset Z34N wheels should be buried in the wheel well, NOT stick out unless there's spacers on already.
As has already been stated, posting pics would help.
Mic
EDIT: Graphic added....
No spacer, no pokey. Rear wheels anyway. (Still room to add a 15mm spacer!)
Last edited by MicVelo; 11-02-2015 at 08:00 AM.
#304
New Member
I'm Still Looking For A Set Of The Sport wheels and lugs ): thinking about trading my current set up
#310
350Z/370Z Tech Moderator
MY350Z.COM
MY350Z.COM
#312
General & Tech Moderator
MY350Z.COM
MY350Z.COM
Relax, gents-