When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I changed the 18" original wheels for the 19" nismo wheels.
The thing is that the rear wheels are not flush with the body and they looks too much out
Of the body, it is about 3/4" inches outside. I think it is due to the offset.
Is there a way to cut out anything in order to get the wheel a little more inside the body?
Not sure I understand what you mean when you say the Niz wheels are "3/4" outside".... And WHICH Nismo wheels are you referring to?
OEM Z34N wheels (9.5/10.5) fit fine on Z33 with spacers to bring offset to "normal" as do the 19" "aftermarket" Nismo S-Tune (LMZ5) 19's (9/10s).
Are the wheels sticking out at the top of the wheel or the lower-rear (side closest to rear of car)? Lower rear poke would be normal as there's 2.0-2.5" extra width on the Nismos over stock set up....
Just sayin' here.... are you sure the car didn't have spacers on it when you installed the Nismos? If anything, the high offset Z34N wheels should be buried in the wheel well, NOT stick out unless there's spacers on already.
As has already been stated, posting pics would help.
Mic
EDIT: Graphic added....
No spacer, no pokey. Rear wheels anyway. (Still room to add a 15mm spacer!)
My bad, im new to this dont really know how to use this forum lol. But are those the sizes? I hve a 350z and want to know if those 370z wheel/tires will fit
