Not sure how I like 'em yet. Haven't finished the build...

They do seem a bit wider than the same size Invo's I was running before.

 

Brandon, looks great man. I'm with Wais on this one we need more pics

 

sorry guys but i need advise from the Guru's in here.
I wanna go even more aggressive with my front setup.

Right now i have:

275/35 18, +25 offset. I've been losing sleep over trying to decide whether I should install 5mm spacers upfront to get an even more aggressive look. Will this rub? I did take some measurements and it looks like it is manageable but i need someone to confirm this.
Suppose I did need camber kits, how many deg I would approximately set? I'm only about an inch dropped.

thanks!!!

 

hi guys, i was hoping to get some input.

current setup up:
front: 18x9 265/35/18 +22
rear: 18x10 285/35/18 +22

camber roughly 2.3 all around.

Just wondering what size spacer would look best? Thanks in advance.

 

You should be ok with only a 5mm spacer up front but I'm sure it won't hurt to add a tad bit of camber for the front.

+22 is what most run, it probably "looks" fine but if you want to add a 10mm spacer max all around it would be what most people run.

 

thanks for the tip. just feel like it looks a bit sunk and was considering 15mm spacers all aronud. Maybe i'll just change the wheel set up for something abit more agressive. thanks for the input tho.

 

Looks are strictly personal opinion, functional-wise a +22 is pretty much ideal.

If you could post a few pics I'm sure you could get additional input.

 

Waizz you're the man.
I'll post up pics once it's done.

 

If it was up to me i'd say no spacers. especially if you're wracking
your brain over 5mm. 10-15mm and you've got my interest.

 

That won't stick out too much? How much camber do you think i need to run if I used 10mm?

front set is: 275/35 18, +25 offset

tia bro

 

What wheel width?

 

man, i cannot WAIT to post up in here.
Soon, tho, maybe 2 more weeks til shes done..

cars still in pieces, but.... i have a set of 325 25 20 pirellis in the back seat of the Lexus.. droppin em off at IMR in a few hours..

i do believe that will qualify me to post in the fat tires thread.

 

9.5

 

i run 18x10.5 +15 up front w/ up to a 285/35/18

so i'd say you've got lots of room.

 

A 10.5 +15 sits nice up front.

Chris

 

awesome! thanks so much for the help guys!!

 

im debating attempting to trade my front 9.5 rpf1 for a 10.5 front

 

in about 2 weeks time I should have all that i need to post up in this thread.

275-35-19 on 9.5 fronts and 295-35-19 on 10.5 rears...

Dropped on Stance Gr+ true style coilovers.. and all the secondary mods that come with that.

To start off with +22 offset all around.. Just curious if I'll need to pull...I'm rolling it once i install everything but will i need to pull dependent upon how low i go?

 

im on tein basics, 3/8" away from maxing out the front to the lowest setting. Im running rota p45r 9.5 +20 on all four corners with a square setup of 275/40. My front camber is -3.7. When i turn, I rub =( how do you guys pull this off?? Im planning on pulling the fenders to fix this

 

thread needs more pictures and less talking