blue350zed

iTrader: (14)

Not sure how I like 'em yet. Haven't finished the build...

They do seem a bit wider than the same size Invo's I was running before.

VQpoweredZ

iTrader: (18)

Brandon, looks great man. I'm with Wais on this one we need more pics

350Zdj

iTrader: (3)

sorry guys but i need advise from the Guru's in here.
I wanna go even more aggressive with my front setup.

Right now i have:

275/35 18, +25 offset. I've been losing sleep over trying to decide whether I should install 5mm spacers upfront to get an even more aggressive look. Will this rub? I did take some measurements and it looks like it is manageable but i need someone to confirm this.
Suppose I did need camber kits, how many deg I would approximately set? I'm only about an inch dropped.

thanks!!!

abo

iTrader: (5)

hi guys, i was hoping to get some input.

current setup up:
front: 18x9 265/35/18 +22
rear: 18x10 285/35/18 +22

camber roughly 2.3 all around.

Just wondering what size spacer would look best? Thanks in advance.

Waiz

iTrader: (57)

You should be ok with only a 5mm spacer up front but I'm sure it won't hurt to add a tad bit of camber for the front.

+22 is what most run, it probably "looks" fine but if you want to add a 10mm spacer max all around it would be what most people run.

abo

iTrader: (5)

thanks for the tip. just feel like it looks a bit sunk and was considering 15mm spacers all aronud. Maybe i'll just change the wheel set up for something abit more agressive. thanks for the input tho.

Waiz

iTrader: (57)

Looks are strictly personal opinion, functional-wise a +22 is pretty much ideal.

If you could post a few pics I'm sure you could get additional input.

350Zdj

iTrader: (3)

Waizz you're the man.
I'll post up pics once it's done.

lgear080

iTrader: (21)

If it was up to me i'd say no spacers. especially if you're wracking
your brain over 5mm. 10-15mm and you've got my interest.

350Zdj

iTrader: (3)

That won't stick out too much? How much camber do you think i need to run if I used 10mm?

front set is: 275/35 18, +25 offset

tia bro

scotts300

iTrader: (46)

What wheel width?

bmccann101

iTrader: (16)

man, i cannot WAIT to post up in here.
Soon, tho, maybe 2 more weeks til shes done..

cars still in pieces, but.... i have a set of 325 25 20 pirellis in the back seat of the Lexus.. droppin em off at IMR in a few hours..

i do believe that will qualify me to post in the fat tires thread.

350Zdj

iTrader: (3)

9.5

lgear080

iTrader: (21)

i run 18x10.5 +15 up front w/ up to a 285/35/18

so i'd say you've got lots of room.

NA&CH

iTrader: (74)

A 10.5 +15 sits nice up front.

Chris

350Zdj

iTrader: (3)

awesome! thanks so much for the help guys!!

SE5spd

iTrader: (17)

im debating attempting to trade my front 9.5 rpf1 for a 10.5 front

Z Professional

iTrader: (7)

in about 2 weeks time I should have all that i need to post up in this thread.

275-35-19 on 9.5 fronts and 295-35-19 on 10.5 rears...

Dropped on Stance Gr+ true style coilovers.. and all the secondary mods that come with that.

To start off with +22 offset all around.. Just curious if I'll need to pull...I'm rolling it once i install everything but will i need to pull dependent upon how low i go?

sleeper400

iTrader: (4)

im on tein basics, 3/8" away from maxing out the front to the lowest setting. Im running rota p45r 9.5 +20 on all four corners with a square setup of 275/40. My front camber is -3.7. When i turn, I rub =( how do you guys pull this off?? Im planning on pulling the fenders to fix this

Duckeee

iTrader: (7)

thread needs more pictures and less talking