All that wait for nothing, it looks TERRIBLE

 

My car is all function. It's probably 1.2-1.5" lower than stock...depending on tires. I am on Motons and hyperco race springs.

Ride height on 315's...

Under Load: (It's pretty close, but doesn't rub)

 

how the hell do i rub then lol i have somewhat a neutral set up and not as flush as you...wtf!

 

What would be a better set up?

19x9 +22 19x10+20

or

19x9 +22 19x10+25

Looking to run 255/35 and 285/35.

 

its only a 5mm diff in the rear. you will not be able to tell really. but i'd go with the first one

 

Since the black wheel thread seems a little slow I'll come here.

Whats some opinions on these? Would be on a PPW 350 with a V2 kit...

Would the rears need a spacer to flush them out and if so what size? I don't want super aggressive... just enough to look flush with the fenders on 285 or 295 tires with a drop and fender roll.

Concept One CSL5.5 19x9 +15 & 19x10.5 +20 Step Lip

 

You should be fine

 

depends what you want to do and the look you want. If you want the lowered/stanced look the higher offset will be oeasier to work with. I have +12s with those widths and they stick out alot. Some people like it i think it looks aggressive but alot of people like flush or even in the wheelwell so they can lower their car alot.

 

If i had to chose one Id go +20

 

what size of rims you running? i plan on getting the same rims in black but i dont know what sizes to get them im at stock height and i plan on lowering it, i was planning on getting 18x10 +18 all around but i didnt know if it was gunna look flush and sit by my fender

 

Thanks! I was nervous too.



265/30 & 305/30 19's

Thanks!

Thanks! No lie that the R888's run big. They could go for a 275/315



TLC is planned for the whole car. Still a good amount to be completed.

 

does anyone know how work xd9 18x10 + 18 all around would look? pics? would the rim sit flush with my fender? with out no camber

 

Would look good, depending on the tires you buy.

 

There's a member that had that setup he posted pictures. Search.

 

found pics thanks

 

So I was wondering if ya'll want to help me with some wheels for my G37S I have? Not looking to go as aggressive as my Z but a nice overall look and not that hellaflush/stretched look at all!

OEM wheel/tires specs are: 18x7.5 +45 225/50-18 (F), 18x8.5 +50 245/45-18 (R)

So I'm leaning towards the HRE 794RS 3-piece in 20's, maybe 19's. Thinking a 9.5(f) & 10.5(r) will keep it nice.

Ideas?

 

You should roll like this, but seriously that's a newb question Rob K and you're no newb. Didn't want to wait for the next gen? Supposed to be available by Spring of 2013.

 

What I came up with was:

20x9.5 +30 255/35
20x10.5 +30 285/30

 

19x10 +25-30ish F/R with 285/30/19 would be sick with a drop.

 

That would look nice but I'm not looking for a rear aggressive look for it. Nor a aggressive drop. This is my daily that I'll be sharing with my wife.