KingBaby

iTrader: (3)

Do whatever you want at stock height...only the rear might/will need a roll.

Option 2

andre81k

iTrader: (1)

In this thread they are going to say go with the second setup haha. Only problem I see is the offsets too low for the width so will poke out too much. Possibly try 19x10+20 and 19x11+25 and could do a 285/30 front and 305/30 rear. Hope that helps.

jgc0726

Alright guys here's my setup need advice on tire

19x10 +15 front
19x11 +15 rear

On stock suspension but will lower of course and will roll fenders as well. So how BIG can I go?

mr. sparco

iTrader: (13)

As wide as you like depending on your suspension setup.

jgc0726

Well I'm stock now but when I lower I just want to delete gap between tire and fender

Robert_K

iTrader: (25)

Well with those offsets they will stick out from the fender. For the front I say somewhere in the 255-275/30 range and for the rear 295-305/30.

For reference I run the following with KW V3 & SPL camber arms & links;
HRE P43SC w/ Toyo R888 tires (Note: The R888 run big than from other brands.)
Front: 265/30-19x9.5 +20
Rear: 305/30-19x11 +25

jgc0726

Damm Robert that is a sweet ride...so what do u think about 255/35 or 30 and 295/35 or 30?

RAYoRAY

iTrader: (1)

What is your camber settings front and rear?

Robert_K

iTrader: (25)

I would play with this calculator if I was you. You can gain a lot of good info.

http://www.rimsntires.com/specs.jsp

To be honest it was completed several months ago and I never received a printout.

jgc0726

Alright after playing with the calculator a little bit this is what I came up with

19x10 et 15 265/30 front
19x11 et 15 295/35 rear

What do u think?

tbruner

iTrader: (5)

Play a little more with the calculator...

Tire sizes (sidewall) should be within 3% difference front and rear. The set-up you chose is over 7% larger in the rear.

jgc0726

Can anybody please help me out with that I'm having a little trouble

I don't wanna go too wide in front and would like to have a 295 out back

jgc0726

Tbruner what offsets are u running?

tbruner

iTrader: (5)

Common setup is:

9.5 +15 Front width 265/35 or 30
10.5 +15 Rear width 285/35 or 30

Why set on 295? I guess you could do:

10 +25 Front width 275/30
11 +25 Rear width 295/30

I have sizes nobody wants... I'm broke so I don't have too many options.

18x8.5 +10 265/35 (too big for my wheel, I will be going back to 255)
18x10 +12 285/35

jgc0726

Lol we on the same boat...I already bought wheels sizes 19x10 +15 so I can go 2 ways from here either put the 19x10's up front or put them out back and go with 8.5's +15 out front, the wheels I got don't make 9's or 9.5's.

With that being said I'm just gonna go 8.5 up front and put the 19x10's in the rear and I'll go with 255/35 up front and 285/35 or 295 not sure.

tbruner

iTrader: (5)

Then do 10" +15 in the front. You will regret 8.5", I do...

What wheels are you looking at?

jgc0726

Well like you I'm broke as well so I bought xxr 531 can't afford high end wheels.

Why will I regret 8.5?

mr. sparco

iTrader: (13)

Why else? It'll look like dookie.

jgc0726

Lol well I made up my mind ima go 19x10 front and 19x10 rear +15 all around and in tires I'll just go with 255/35 front and 275/35 rear

tbruner

iTrader: (5)

That's better, but those tire sizes wont allow you to post in here...

You could go bigger. I would try 265 F & 285 R