Intimazy,

Are you running the 18x10 +35 RSs with spacers? If so, how do you think the fitment of a 285 would be on a +25?

Thanks

 

No problem. My 18x10 +38 (then add 10mm spacer) fit with a 285 and a 295/30/18 tire, and still more room.

 

+25 may not work. It will all depend on the tire. V710s are HUGE. A more typical 285 may fit fine. I noticed that I do have a few cut markes on my tires that may be due to the fender. I need to check the fenders themselves to confirm but if you are trying to fit something bigger than a 285 with a V710 it may not be possible with stock fenders.

 

has anyone ever ran a 305 on a 10" wheel?

im going to need new tires and want to go from a 285 to a 305, is it ok?

 

A local member runs 305 on Advan RS-D 19x10 for his 370Z with slightly budge. but still looks flush with the wheel.

 

That's too big. We run 305 Michelin PS2s on 10.5" wheels - no bulge, but it is plenty big on the wheel. A 305 on a 10" will bulge - stick with a 295.

 

i run 305-25-20 falken 452's on a 10" wheel
its little to no bulge, it looks more square than anything, so i say go for it .
nismonian....what size wheel will it go on?....which tire's are you looking into?

scott if im not mistaken dont michelin ps2's run bigger than other tires? and i think my wheel looks doesnt look too big since its 25 series

theres is also another pic on the last page of 305-30-18 on 10" wheel

 

in for specs?

looks nice
post more pics

 

well im looking into nitto invo's but they dont make a 295 for my setup.
wheels are work vs-xx in 19"

 

bump bump bump,

i still want to know those specs...lol

 

^here's another thread from him:

 

Has anyone squeezed a 315 in the rear on a 18x11.5 wheel?

 

umm can i get a amen for nice fat tires!

 

amen

 

Amen brotha!!!

 

Hey everyone,

Sorry for not posting up my specs. I haven't been on the thread much and didn't realize.

But yea as already posted 18x10 +3 285/35 & 18x9 +5 255/35.

The rolling shots were at -2 though.
Lowered on Bilstein PSS coilovers

Thanks everyone, keep this thread alive!

 

Im on 19x10 285/35 & 18x9 255/40

-2 camber on Tein Mono's

 

What's the offset gonna be??? Remember i had a 305 on 10.5 with a +24 offset and i had no problem.

 

My old setup F19x8.5 w/ 245/35 Falken 452's and R19x10.5 w/ Michelin PS2's