I am looking at a set of gram lights someone is selling on Zilvia I am running a 18x10 +11 on the rear now and its almost flush..I dont have a camber kit so its angle like a ****..his are a 18x10 -15...how much quarter work is it gonna need to fit these things?worth doing?

thanks!

 

add a set of 25mm spacers to your current wheels and see where they end up. That, +1mm, is where the new wheels would be

 

Tire?

 

rolled fenders, stretched tires and maybe some negative camber...I'm running a 19x10.5 offset of -5 and I have no problems I'm running 245/35/19
this is how they look from the rear...hope this helps....

 

hmm good idea...ima try a local tire shop or something see if i can find one to borrow!..running a 245 on that big of a wheel just scares the **** out of me..one hole...bend the **** out of 57S pro ti...id cry!

 

the tire on the rim now is a 265/35/18 also...

 

I am in the process of putting on 19X10 -15 on my car with a 275/45 and I couldnt fi tthe rears on the car. I have to put on my camber kits and run neg camber in order to get them to fit. If I ran stretched tires I would be able to do it with out neg camber.

 

LOL at the doll on the rear bumper.

Nice setup!!

 

I never was much on those tuner image wheels..but how you have them done looks very nice.

 

275/45? Completely the wrong size

even with stretched tires, you are going to have to use a combination of rolling/pulling and negative camber to make that offset work