i have a question for anybody that might know. i plan on running 245 45 18 tires that normally run on the rear wheels of my 03 z. the wheels that i will be running are ti 5 18x9.5 with the stated above tire size do you think i will need a spacer and extended studs please leave any fedback possable thank you

 

Ti 5? Is that the name of the wheel? What's the offset of the wheels?

 

thats what i believe they are called the specs are 18x9.5 with a 245 /45/18 tire size i believe the offset is 15 or 30 not too shure

 

I hope it's not 30, it wouldn't look good (it'll be tucked in). If it's +15mm, with your tire size you will be ok. Are you lowered or on stock suspension?

 

currently yeas but i am looking at a set of d2 coilovers or some tanabe drop springs

 

I did a quick search and those Ti 5 wheels don't look too bad. Hopefully you got the +15mm model, it has a 4" lip The +30mm model has a 3" lip. You can still make the +30mm look decent with a 20mm spacer. Post pics when you're done.

 

ohh they look beautifull cause i have a pearl white z ..i got them on the back riight now but they are going to be 19 x 10.5 in the rear staggered for the win cant wait pics will be on there way

 

Put the wheels and tires on the car.
See if you need to move the tires out.
Buy the appropriate spacers.

 

so you plan to run 245/45/18 on the front? go with 245/40/18 same as nismo, then a 275/35/19 on the 19x10.5 rear

 

What he said.

 

a 245/45/18 is too tall for the front. go with a 275/35/18, if you got the 9.5 +30.

 

i already have the 245 45 mounted maybee down the line ill switch to the 40 profile , they are on the rear now im just worried they wont fit on the front ,or i might have rubbing issue.. and yes i plan on going 275 /35/19 in the rear thank you for everyone's input please keep it up

 

im running 245/40/18 +15 all around with a 25mm spacer out back and might add a 15mm in the front. it sits aggressive and rubs in the back on some bumps

 

what size rim up front ? any rubbing during turning? cornering ? and post some pics so i can see what it look likes thanks for the info