I'm trying to find out if I can use 15" wheels on my 08 350z. Since 2 tires & wheels can cost more than a bit of $$$$, I'd like to be sure. There are also many type & fits of 15" wheels. Anyone here actually used & can recommend some brands & styles.
Thanks

 

15?...you might be able to find 18's for the same price of 15's

 

Edit*

 

hahaha i know i drifted on s14 stocker's once in the rear 16's

but if you really want to ride around on 15's and not have people laugh at you your highly mistaken

 

15 that's kind of small don't you think. Its not a honda. Why not try 17 atleast?

 

15 inch wheels are well covered in the drag racing forum.

 

As long as you don't have brembo's you can....I assume this is what you want to mount your slicks on? I ran 15's on the back w/o issue. You just need to make sure you get the correct bolt pattern, offset, and backspacing.

 

Either I wasn't very clear, or you guys have a problem with reading/understanding

 

Did you use Weld wheels? Model? Even the tech guy wasn't sure. I don't want to buy a set of 15" slicks & wheels only to find out they don't fit. 08 might hae different brakes set up than sime older ones.

 

Yes, I used welds. +25 offest, 5x4.5" bolt pattern, and 5.5" backspacing. Keep in mind this was with only an 8" wide wheel. I still ran the 275/50/15 MT DR's without issue, and it is a common set-up.

Link:
http://www.summitracing.com/parts/WLD-96-58210/

Pics on car from early last year:

 

If you would have said 15" wheels for drag or track use I would have understood. Meh bad......

 

meh bad too

 

Thats what I've been looking at. Any issues with log nuts?

 

No, I used the lugs from weld. They are fairly long closed end lugs. I just checked them every few runs or so.

 

Log nuts.

Anyone have issues with them?

 

Thanks-I'm going to give it a shot-in a couple of weeks you'll have to make a change to the list-12.8 coming
If things go well, I'd like to go race that 370z guy in Florida. Need a mod for 10 more hp-nah, Ill just change the oil