2013 370z 18" wheels on my 350z
#1
2013 370z 18" wheels on my 350z
I think it looks pretty sharp. I've got spacers for the front coming in next week but I think these wheels work pretty well on the 350z. I think a small drop will round it out nice.
2013 370z 18 inch wheels on 350z
Last edited by RiujinZero; 09-12-2015 at 04:35 AM.
#3
350Z/370Z Tech Moderator
MY350Z.COM
MY350Z.COM
The following 2 users liked this post by guitman32:
jtjtherapy (04-16-2021),
RiujinZero (09-15-2015)
The following users liked this post:
RiujinZero (09-15-2015)
#7
Yea, the whole point was to avoid cheap wheels lol. I want the OEM+ look. Ever since I saw these wheels on the 370z I thought they would look great on the 350z. I got the spacers on today and it brings the front wheels flush.
Unfortunately I snapped a stud due to my cheap torque wrench
I'll be picking up either swift r's with koni yellows or ohlins coils next springs. Spent too much money already lol
Unfortunately I snapped a stud due to my cheap torque wrench
I'll be picking up either swift r's with koni yellows or ohlins coils next springs. Spent too much money already lol
Trending Topics
#9
Registered User
Join Date: Feb 2014
Location: Colorado
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Hey I know this thread is a bit old but I have a chance to pick up a set of these with tires for my 350z roadster can you tell me if spacers were needed on the rear or just the front?
#10
350Z/370Z Tech Moderator
MY350Z.COM
MY350Z.COM
Rear OEM wheels are usually in the neighborhood of +30 like Z33s.
#12
350Z/370Z Tech Moderator
MY350Z.COM
MY350Z.COM
#13
Registered User
Join Date: Feb 2014
Location: Colorado
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
ok thank you for the help i have the 19 inch 370 wheels currently and have 20 mm hub centric spacers in the front hopefully those will work for the front will just leave the rear without spacers.
#14
350Z/370Z Tech Moderator
MY350Z.COM
MY350Z.COM
19" Nismos? OK, well skip what I was about to say.... that is: Careful on lugnuts.... Z34 wheels use shanked/washer lug nuts versus acorns on the Z33. But since you already have 'em...
#17
350Z/370Z Tech Moderator
MY350Z.COM
MY350Z.COM
Just looked those up to be sure because I seemed to recall that these had a very different offset from the Nismo V5s that I'm more used to.... These 370Z wheels are 18x9 rears with +15 offset and accordingly, would GUESS that you'd only be able to get away with maybe 10mm spacers. And there's a good chance you'd need to roll if lowered. But again, this is just an educated guess.
#18
General & DIY Moderator
MY350Z.COM
MY350Z.COM
iTrader: (64)
Just a public service reminder for anybody considering 370Z wheels: the lug nut seats are different and you'll need a full set of 370Z lug nuts to safely mount them (spacers or not) on your car! Don't use 350Z lug nuts and have those wheels get loose- I bet there're some people who've lost wheels b/c of this..
#19
Registered User
Join Date: Feb 2014
Location: Colorado
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Yeah they are the same wheels at the beginning of this thread. I do have the right lugs for them. I am not lowered just want them to stance out a bit more than they are I just didn't want to order/buy the spacers and then have them not work. I think 10 mm might be all I can get away with thanks for the info guys.
#20
Registered User
Join Date: Feb 2014
Location: Colorado
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
what tires are you running with those wheels? I have these and I have 225/50/18 in the front and 245/45/18 in the rear and my traction control occasionally goes haywire. I am needing new tires in the back and I am thinking of going 255/45/18 to bring the overall diameter in the rear bigger to hopefully solve the problem however not sure if this tire size will rub, any input guys.