Bass Link installed in Factory Space!
#1
Registered User
Thread Starter
iTrader: (1)
Join Date: Aug 2002
Location: Sesame Street
Posts: 5,096
Likes: 0
Received 0 Likes
on
0 Posts
Bass Link installed in Factory Space!
Got the bass link to keep my four other infinitys company. As you can see it is mounted in the stock sub spot. Also we dyno matted the hell out of the area. It works.
Nice clean base and no rattles. I am a happy man.
At 200 watts, it aint overkill, but I dont need that much. Especially with a cabin this small!
Factory Cover purchased thru UltimateZ.com
Nice clean base and no rattles. I am a happy man.
At 200 watts, it aint overkill, but I dont need that much. Especially with a cabin this small!
Factory Cover purchased thru UltimateZ.com
#5
Registered User
Join Date: Jan 2003
Location: New Jersey
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
I'm Jealous. I had the same idea going through my head. I am glad to see that it worked out well for ya. Did you Dynomat only the sub compartment or did you do the entire area including the rear speakers?
#6
Registered User
Join Date: May 2003
Location: Weatherford, Texas
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Man thats exactly what i am going to do. Why did you mount it down, could you rig up a bracket to point the sub toward the opening, just an idea. Exactly how much dynamat did u use
#7
Registered User
Thread Starter
iTrader: (1)
Join Date: Aug 2002
Location: Sesame Street
Posts: 5,096
Likes: 0
Received 0 Likes
on
0 Posts
We used one $69 pack of dynomat. I am unsure of the square footage. I only had the enclosure wrapped. That was all I needed. I am not running a four channel amp. through the speakers and tweets I am just doing my sony 52watts per channel. I dont need an eardrum blasting showcar!
The unit is mounted facing down because the position is acoustically superior to angling it out. The mount position also has the most level surface.
Cosmetically it might suck that it is not angled out but IDGAF
If you are considering doing this, I reccomend you do it the same way! Dont assume the installer will take the trouble to test how it sounds best.
Again this is not the route to go if you like impressing people in 'the hood'. It is the way to go if you want a nice clean all around system. Don't worry, It may be civilized, but it still thumps!!
The unit is mounted facing down because the position is acoustically superior to angling it out. The mount position also has the most level surface.
Cosmetically it might suck that it is not angled out but IDGAF
If you are considering doing this, I reccomend you do it the same way! Dont assume the installer will take the trouble to test how it sounds best.
Again this is not the route to go if you like impressing people in 'the hood'. It is the way to go if you want a nice clean all around system. Don't worry, It may be civilized, but it still thumps!!
Trending Topics
#10
Registered User
iTrader: (1)
Join Date: May 2002
Location: Houston - Texas
Posts: 2,878
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Raistlin
That is an awesome idea, couple questions.....
What size (or model) is the Bass Link?
What brackets did you use to mount it? (size..etc)
Where did you buy them?
Thanks
That is an awesome idea, couple questions.....
What size (or model) is the Bass Link?
What brackets did you use to mount it? (size..etc)
Where did you buy them?
Thanks
Basslink is made by Infinity.
It is a subwoofer unit with a built in amplifier. All you need for it to work is to run RCAs or speaker wires to the unit and power source (direct from battery)
It comes with all necessary hardware for mounting. It sounds amazing for the size (when tuned right )
#11
Registered User
Join Date: Oct 2002
Location: Long Island
Posts: 1,680
Likes: 0
Received 0 Likes
on
0 Posts
Hell yeah....this is exactly what I was wanting to hear. I'm glad someone finally took the plunge and tested it out. The only thing I was concerned about was the sound quality, and apparently that's not an issue. This is definitely going to happen now.
Thanks a lot!
Thanks a lot!
#12
Originally posted by toykilla
Basslink is made by Infinity.
It is a subwoofer unit with a built in amplifier. All you need for it to work is to run RCAs or speaker wires to the unit and power source (direct from battery)
It comes with all necessary hardware for mounting. It sounds amazing for the size (when tuned right )
Basslink is made by Infinity.
It is a subwoofer unit with a built in amplifier. All you need for it to work is to run RCAs or speaker wires to the unit and power source (direct from battery)
It comes with all necessary hardware for mounting. It sounds amazing for the size (when tuned right )
Thanks for the 411 though
#14
New Member
iTrader: (9)
Coolness. You beat me to it. I was going to do the same thing. I
just hadn't gotten to pulling the panel and seeing if the BassLink
would fit. I had a feeling I wouldn't have enough room to stand it
up the right way. As you said, it probably wouldn't have sounded
as good anyway.
Good job!!! Thanks for the much awaited photos too!!!
ADMAN
just hadn't gotten to pulling the panel and seeing if the BassLink
would fit. I had a feeling I wouldn't have enough room to stand it
up the right way. As you said, it probably wouldn't have sounded
as good anyway.
Good job!!! Thanks for the much awaited photos too!!!
ADMAN
#15
Registered User
Thread Starter
iTrader: (1)
Join Date: Aug 2002
Location: Sesame Street
Posts: 5,096
Likes: 0
Received 0 Likes
on
0 Posts
All brackets were used to mount the Baselink! I was all set to have a custom fiberglass box made then installed in that area, but I said F*K it. It was literally an impulse decision.
I had been thinking about it but I went in to Circuit city not knowing what to do. I just pointed at the thing and said : PUT THAT IN MY CAR!
Thanks for the complements. it was my pleasure to post the pictures!
Added bonus: Theives will not see the woofer, but even if they know about it they will need a good 2 hours to tear apart that section of the car! That thing is in there!
I had been thinking about it but I went in to Circuit city not knowing what to do. I just pointed at the thing and said : PUT THAT IN MY CAR!
Thanks for the complements. it was my pleasure to post the pictures!
Added bonus: Theives will not see the woofer, but even if they know about it they will need a good 2 hours to tear apart that section of the car! That thing is in there!
#17
Registered User
Join Date: Oct 2002
Location: Long Island
Posts: 1,680
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by joust75
We used one $69 pack of dynomat. I am unsure of the square footage.
We used one $69 pack of dynomat. I am unsure of the square footage.
#19
Registered User
Thread Starter
iTrader: (1)
Join Date: Aug 2002
Location: Sesame Street
Posts: 5,096
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Stone Z
Circuit City uses a new brand of deadening made by Tsunami. It's supposed to be a little thicker and stick better than Dynomat. From the price, it looks like you used the *door* package which is 12 sq. ft.
Circuit City uses a new brand of deadening made by Tsunami. It's supposed to be a little thicker and stick better than Dynomat. From the price, it looks like you used the *door* package which is 12 sq. ft.
#20
Registered User
Thread Starter
iTrader: (1)
Join Date: Aug 2002
Location: Sesame Street
Posts: 5,096
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Stone Z
joust75
Did you have them install the Bass Level Controller?
joust75
Did you have them install the Bass Level Controller?
BTW, I highly reccomend this model. It matches the Z dash better than any other aftermarket HU. It is the Sony CDX CA810X XPLODE.
I posted some pics a while back, Ill try to find the link to the thread!